No abstract

Hydroxyapatite coatings have been deposited on titanium cp by plasma spray, sol-gel, and sputtering techniques for dental implant applications. The latter two techniques are of current interest, as they allow coatings of micrometer dimensions to be deposited. Coating morphology, composition, and structure have been investigated by scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD). All coatings were homogeneous and exhibited a rough morphology suitable for implant applications. The sputtered (after annealing), plasma spray, and sol-gel coatings all showed diffraction peaks corresponding to hydroxyapatite. The surface contaminants were observed to be different for the different coating types. The sputtered coatings were found to have a composition most similar to hydroxyapatite; the sol-gel deposits also showed a high concentration of hydroxyl ions. A discrepancy in the Ca/P ratio was observed for the plasma spray coatings, and a small concentration of carbonate ions was found in the sputter-deposited coatings. The in vitro cell-culture studies using MG63 osteoblast-like cells demonstrated the ability of cells to proliferate on the materials tested. The sol-gel coating promotes higher cell growth, greater alkaline phosphatase activity, and greater osteocalcin production compared to the sputtered and plasma-sprayed coatings.

Failures of small internal diameter vascular grafts have been caused by the lack of a stable endothelial lining to form on their artificial surfaces. Polymer surfaces can be optimized by means of proper treatment to allow a homogeneous and uniform coverage in artificial prosthesis applications. Several solutions were studied to improve cell attachment and growth on artificial materials. In the present study, polyethyleneterephthalate (PET) surfaces were treated by plasma processes with oxygen and ammonia and also in the presence of a gas mixture to verify the effect of functional groups grafting onto the endothelial cell growth. Related surface chemical modifications were investigated by X-ray photoelectron spectroscopy (XPS). Then using cytotoxicity and cytocompatibility tests, the biocompatibility of the modified PET surfaces was assessed by studying the behavior of human umbilical vein endothelial cells (HUVEC). The results showed that plasma-treated PET samples have no toxic effect on HUVEC. The cytocompatibility tests revealed an increase in cell growth with incubation time and the presence of well-spread and flattened cells (SEM analyses). Thus it is reported that plasma treatments can improve PET biocompatibility to HUVEC.

Injectable fillers are commonly used in Plastic and Reconstructive Surgery to correct serious and slight aesthetic defects due to their low invasiveness and an easy implant technique procedure. Synthetic hydrogels are proposed as filler materials for their similarity with soft tissue and to avoid many disadvantages of naturally derived materials such as short persistence, allergenicity, and immunogenicity. Our studies are focused on the biocompatibility evaluation of a polyacrylic hydrogel containing alkylimide-amide groups and pyrogen free water (96%) (Bio-Alcamid by means of the in vitro cytotoxicity and mutagenicity assays and the in vivo skin irritation, sensitization test, and subcutaneous implant. All tests conducted on Bio-Alcamid showed no toxicity. It is a substance easy to inject and remove; it does not migrate, and its safety allows it to be a suitable filler for the correction of slight and also very serious aesthetic defects.

No abstract