No abstract

Self-harm (SH; intentional self-poisoning or self-injury) is common in children and adolescents, often repeated, and strongly associated with suicide. This is an update of a broader Cochrane review on psychosocial and pharmacological treatments for SH published in 1998 and updated in 1999. We have now divided the review into three separate reviews; this review is focused on psychosocial and pharmacological interventions for SH in children and adolescents.

In this research two thicknesses of a woven CFRP laminate have been subjected to impact by a steel sphere in a velocity regime ranging from 170 m/s to 374 m/s. Impact and penetration of targets at normal and oblique incidence were studied using high speed video. For the normal incidence targets at the higher velocities of impact, a conical mass of laminate was ejected ahead of the projectile. Furthermore, despite the energy transferred to the plate increasing with impact energy, the degree of delamination in the thicker targets decreased indicating a change in projectile penetration mechanism. Eventually, the degree of delamination in the thicker targets appeared to approach an asymptotic level whereas for the thinner targets the degree of delamination appeared constant regardless of impact energy. For oblique targets more of the kinetic energy was transferred from the projectile when compared to the same thickness of target that had been subjected to a normal incidence impact. However, this was merely due to a geometrical effect. Further, thicker panels appeared to behave more efficiently by absorbing more kinetic energy per effective linear thickness at the lower impact energies Composites Part A: Applied Science and Manufacturing 39 (5), pp. 866-874 (2008) 2 where petalling is a dominant factor in the penetration. This advantage appeared to disappear as the impact energy was increased.

WC-based ceramic metal composites ͑cermets͒ are of great importance in both armor and munition design due to the combination of properties imparted by the presence of two different phases. WC-Co cermets are of interest in this area due to the hardness and strength imparted by the WC phase while the cementing Co matrix acts to increase plasticity and toughness. Here the dynamic response of G13 WC-Co manufactured by Kennametal Engineered Products B.V. was studied via a series of plate impact experiments involving both longitudinal and lateral gauges, which allowed determination of the U s − U p relationship, measurement of a Hugoniot elastic limit of 3.3Ϯ 0.2 GPa, measurement of a spall strength of 4.38 GPa, and an investigation of the stress dependence of shear strength in such a strong material.