Numerical simulations and parametric studies have been used to investigate the influence of potential poundings of seismically isolated buildings with adjacent structures on the effectiveness of seismic isolation. Poundings are assumed to occur at the isolation level between the seismically isolated building and the surrounding moat wall. After assessing some common force-based impact models, a variation of the linear viscoelastic impact model is proposed to avoid tensile impact forces during detachment, while enabling the consideration of permanent plastic deformations at the vicinity of the impact. A large number of numerical simulations of seismically isolated buildings with different characteristics have been conducted under six earthquake excitations in order to investigate the influence of various design parameters and conditions on the peak floor accelerations and interstorey deflections during poundings. The numerical simulations demonstrate that poundings may substantially increase floor accelerations, especially at the base floor where impacts occur. Higher modes of vibration are excided during poundings, increasing the interstorey deflections, instead of retaining an almost rigid-body motion of the superstructure, which is aimed with seismic isolation. Impact stiffness seems to affect significantly the acceleration response at the isolation level, while the displacement response is more insensitive to the variation of the impact stiffness. Finally, the results indicate that providing excessive flexibility at the isolation system to minimize the floor accelerations may lead to a building vulnerable to poundings, if the available seismic gap is limited.

No abstract

No abstract

SUMMARY During strong earthquakes, structural poundings may occur between adjacent buildings because of the limited separation distance and the deformations of their stories. A potential mitigation measure for this problem is the incorporation of layers of soft material, such as rubber, which can act as collision bumpers, in order to prevent the sudden impact pulses. In an effort to investigate the effectiveness of such an impact mitigation measure, relevant numerical simulations and parametric studies can be performed. However, none of the known impact models, which are available in the literature, is able to represent the usage of rubber bumpers with sufficient accuracy. The current study presents a simple but efficient methodology that can be used to simulate the incorporation of rubber layers between neighboring structures with relatively narrow seismic gaps. Such methodology will enable us to numerically investigate the effectiveness of using rubber bumpers to mitigate potential earthquake‐induced pounding. In particular, a new nonlinear inelastic force‐based impact model, able to appropriately describe the behavior of rubber under impact loading, taking also into account the limited thickness of the bumper, is introduced. Finally, a numerical example of simulating earthquake‐induced pounding between two multistory buildings with the consideration of rubber bumpers at impact locations is presented. Copyright © 2012 John Wiley & Sons, Ltd.

No abstract