Abstract-Electron and hole multiplication characteristics, and have been measured in Al Ga 1 As ( =0 -0.60) homojunction p + -i-n + diodes with i-region thicknesses, from 1 m to 0.025 m and analyzed using a Monte Carlo model (MC). The effect of the composition on both the macroscopic multiplication characteristics and microscopic behavior is therefore shown for the first time. Increasing the alloy fraction causes the multiplication curves to be shifted to higher voltages such that the multiplication curves at any given thickness are practically parallel for different The ratio also decreases as increases, varying from 2to 1as increases from 0 to 0.60 in a =1 m p + -i-n + The Monte-Carlo model is also used to extract ionization coefficients and dead-space distances from the measured results which cover electric field ranges from 250 kV/cm-1200 kV/cm in each composition. These parameters can be used to calculate the nonlocal multiplication process by solving recurrence equations. Limitations to the applicability of field-dependent ionization coefficients are shown to arise however when the electric-field profile becomes highly nonuniform.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.