Joining of multimaterials is a major issue for several industrial applications where the combination of individual material properties increases component performance. The objective of this experimental study is to assess the laser weldability of NiTi to Ti-6Al-4V. Dissimilar welds were performed on 1-mm-thick plates with a high-power fiber laser with different heat inputs to control the cooling rate. Fracture was always observed in the weld metal in a solidification cracking phenomena. Scanning electron microscopy with EDS was performed to analyze the fracture surfaces. Solidification cracking was observed in the fusion zone associated to Ti 2 Ni formation in two distinct fracture morphologies: brittle transgranular cracking in the Ti 2 Ni regions and dimple intergranular failure along the solidification dendrites. Thus, autogeneous welding of these two materials is difficult due to intermetallics formation and filler materials or interlayers are needed to prevent the formation of brittle intermetallics.

No abstract

In the Iberian Peninsula, the copper metallurgy from the Chalcolithic to the Middle Bronze Age (MBA) was mostly characterized by low arsenic contents. A collection of 53 MBA artefacts from southern Portugal was analysed by micro‐EDXRF, optical microscopy, SEM–EDS and Vickers to investigate the metal composition and manufacture. No technological distinction was found between artefacts from domestic and funerary contexts, which were radiocarbon‐dated to 2000–1500 cal bc. The arsenic contents of almost 100 MBA artefacts from this region, including the above‐mentioned set, have a Gaussian distribution with a high average (3.9 wt% As). Possible explanations are discussed for this distinctive metallurgy at the south‐western end of the Iberian Peninsula.

No abstract

The composition and manufacture of Late Bronze Age metallic artefacts from funerary and domestic contexts of southern inland Portugal was studied. The prevailing trend comprises binary bronzes (10.3 ± 2.1 wt% Sn) showing deformed equiaxial grains, annealing twins and slip bands. The alloy composition is somewhat independent of artefact type, while the manufacture seems to rely on artefact function and the skilfulness of the metallurgist. The technological characteristics were linked with archaeological and chronological features, disclosing some artefacts of uncommon composition, such as low-tin bronze bracelets (4.3-7.1 wt% Sn) associated with ornaments of exotic materials (glass and Egyptian faience beads, and also ostrich egg shell beads). The assemblage testifies to an archaic trade with the Mediterranean region before the establishment of the first Phoenician colonies on the southern Iberian coast.