No abstract

No abstract

a b s t r a c tAnthocyanin stability and antioxidant activity of powdered açai juice was evaluated throughout 120 days. Powders were produced by spray drying using four types of carrier agents: maltodextrin 10DE, maltodextrin 20DE, gum Arabic and tapioca starch. Samples were stored at different temperatures (25 and 35°C) and water activities (0.328 and 0.529), in order to verify the effect of these conditions on anthocyanin degradation and antioxidant activity reduction. Anthocyanin degradation exhibited two first-order kinetics: the first one, with higher reaction rate constant, up to 45-60 days of storage, and the second one, after this period, with lower degradation rate. Both temperature and water activity negatively affected anthocyanin stability. Antioxidant activity also decreased with increasing water activity, but was higher for the powders stored at 35°C. Maltodextrin 10DE was the carrier agent that showed the best pigment protection and the highest antioxidant activity, for all the conditions studied.

No abstract

The objective of this work was to study the influence of some process conditions on the microencapsulation of flaxseed oil by spray drying. The process was carried out on a mini spray dryer and gum Arabic was used as wall material. Seventeen tests were made, according to a central composite design. Independent variables were: inlet air temperature (138-202°C), total solid content (10-30% w/w) and oil concentration with respect to total solids (10-30% w/w). Encapsulation efficiency, lipid oxidation and powder bulk density were analyzed as responses. Powder morphology and particle size distribution were also analyzed. The feed emulsions were characterized with respect to droplet size and viscosity. Higher solid content and lower oil concentration led to higher encapsulation efficiency and lower lipid oxidation, which was related to the higher emulsion viscosity and lower droplets size. Increasing drying temperature resulted in higher lipid oxidation. Bulk density increased when higher solid content and lower inlet air temperature were used. The particles were rounded and shriveled, and their mean diameter was mainly affected by total solid content.