Despite the high energy densities, lithium–sulfur (Li–S) batteries suffer from insufficient cycle life originating from the shuttling process involving lithium polysulfides (LiPSs). Various approaches have been introduced to resolve the shuttling problem, but they are not usually effective for electrodes with high sulfur contents. Here, we report an exfoliated 2D lepidocrocite titanium oxide nanosheet as a component for sulfur cathodes to suppress polysulfide dissolution markedly. In particular, the Lewis acidity originating from undercoordinated Ti species as well as the large surface area associated with the 2D structure endow 2D lepidocrocite titanium oxide with an efficient interaction with LiPSs. As a result, even with a sulfur content of 80 wt %, the Li–S cell exhibits 1023.5 mAh g–1 at 50 mA g–1 and a capacity retention of 82.3% after 300 cycles measured at 1000 mA g–1. The considerably improved cycling performance provides useful insight for designing sulfur cathodes, that is, the incorporation of acidic 2D metal oxide nanosheets.

Mesoporous hybrid network of reduced graphene oxide (rG-O) and layered MnO(2) nanosheets could act as an efficient immobilization matrix for improving the electrochemical activity of layered double hydroxide (LDH). The control of MnO(2) /rG-O ratio is crucial in optimizing the porous structure and electrical conductivity of the resulting hybrid structure. The immobilization of Co-Al-LDH on hybrid MnO(2) /rG-O network is more effective in enhancing its electrode activity compared with that of on pure rG-O network. The Co-Al-LDH-rG-O-MnO(2) nanohybrid deliveres a greater specific capacitance than does MnO(2) -free Co-Al-LDH-rG-O nanohybrid. The beneficial effect of MnO(2) incorporation on the electrode performance of nanohybrid is more prominent for higher current density and faster scan rate, underscoring the significant enhancement of the electron transport of Co-Al-LDH-rG-O. This is supported by electrochemical impedance spectroscopy. The present study clearly demonstrates the usefulness of the porously assembled hybrid network of graphene and metal oxide nanosheets as an effective platform for exploring efficient LDH-based functional materials.

The crystal phase of nanostructured metal oxide can be effectively controlled by the hybridization of gallium oxide with reduced graphene oxide (rGO) at variable concentrations. The change of the ratio of Ga2O3/rGO is quite effective in tailoring the crystal structure and morphology of nanostructured gallium oxide hybridized with rGO. This is the first example of the phase control of metal oxide through a change of the content of rGO hybridized. The calculations based on density functional theory (DFT) clearly demonstrate that the different surface formation energy and Ga local symmetry of Ga2O3 phases are responsible for the phase transition induced by the change of rGO content. The resulting Ga2O3-rGO nanocomposites show promising electrode performance for lithium ion batteries. The intermediate Li-Ga alloy phases formed during the electrochemical cycling are identified with the DFT calculations. Among the present Ga2O3-rGO nanocomposites, the material with mixed α-Ga2O3/β-Ga2O3/γ-Ga2O3 phase can deliver the largest discharge capacity with the best cyclability and rate characteristics, highlighting the importance of the control of Ga2O3/rGO ratio in optimizing the electrode activity of the composite materials. The present study underscores the usefulness of the phase-control of nanostructured metal oxides achieved by the change of rGO content in exploring novel functional nanocomposite materials.

No abstract

No abstract