No abstract

Issues of excessive sedimentation of sediment in the pre-chambers of reclamation pumping stations are important in ensuring their reliable operation. Examinations have established that excessive detritus deposition in the intake part of the chamber complicates the water intake by pumps, increases energy consumption. For the timely cleaning of the intake chamber from detritus, a new device, equipped with a hydrajet pump fed from the pressure pipe of the main pump of the station is proposed. An equation for the pressure-flow characteristics of a water-jet pump used to drain the hydraulic mixture (water + solid mass) based on the of E.A. Sokolov and N.M. Singer methodology and the parameters of the hydrajet pump at given pressure values and the planned value of the flow rate of the solid mass have been obtained. The optimal values of the relative head h = 0.19 and the relative flow q = 0.6. At these values, the efficiency of the installation will be maximum. The results of the experiments carried out according to the estimation design have shown their satisfactory convergence with the calculated data and made possible to determine the optimal pressure and flow parameters of the hydrajet pump from the maximum efficiency.

The issue of assessing the impact of the main technological characteristics of wells on the power consumption of pumps is one of the important issues. Based on the analysis of the data obtained in the article, the electric energy consumption of the well pump device the rotational speed of the pump (co); the density of the solution (liquid) (p); the pressure generated by the pump (H); the performance of the pump aggregate (q); depth of the well (H); hydrodynamic resistance (dp); Also, on the basis of the STATISTICA program, the calculation work is carried out, the binding function of the pumps is determined to what extent the factor affects the electricity consumption, and is described in the Pareto diagram.

In our country, a lot of attention is paid to the development of the energy sector. A lot of work is underway to modernize existing capacities and commission new capacities. At the same time, the unit capacities of units and power plants also increase, which ensures faster commissioning of capacities in the power system and an increase in the efficiency of power plants. Attention is also paid to the development of power plants based on renewable energy sources (hydraulic, solar, wind, etc.). One of the most important tasks in the power industry is to cover peak minimum and maximum loads, which is becoming increasingly important in connection with the growth of the power system's capacity. As is known, according to world indicators, the maneuverable capacities should be about 25% of the total power of the EPS. The most promising maneuverable capacities are hydroelectric power plants. However, in our country, hydroelectric power plants account for about 14.3%. This task will become more complicated with the introduction of capacities based on solar and wind energy and the commissioning of new hydroelectric and thermal power plants in the Republic. This is because RES capacities have a significant discontinuity even during the day, and the water resources in the Republic are primarily for irrigation and drainage purposes and are significantly variable during the season. One way to solve these problems in the world is the creation and use of pumped storage power plants (PSPP). The peculiarities of the creation and use of pumped storage power plants in our region are that the available hydro resources of our region are mainly of water management importance, while the task is also to increase the energy efficiency of existing reservoirs. Based on the foregoing, we can say that the development of methods for determining the economic efficiency of pumped storage power plants, taking into account direct and indirect effects, taking into account the peculiarities of their use in energy and water management systems of Uzbekistan is the main task for the present time. To solve the set tasks, a new methodology and program for substantiating the technical and economic indicators of pumped storage power plants in Uzbekistan's energy and water management systems have been developed. The schemes of using pumped storage power plants at four energy and water management facilities, that is, the Tuyamuyun hydro subunit, Arnasai, Talimarjan, and Khodjikent reservoirs, were considered, and for these facilities, based on the developed methodology and program, their technical and economic parameters of the pumped storage power plant were determined. Based on the results obtained, it can be said that using the PSPP in four facilities, it is possible to generate a total of about 418 MW of capacity and more than 930.0 million kWh of electricity, as well as to save 139 thousand tons of fuel equivalent per year, with this, the annual economic efficiency will be about 700.0 billion sums.

No abstract