No abstract

A Bioelectrochemical fuel cell was fabricated with pretreated and fermented rice husks. The fuel was characterized with variation of process variables by determination of chemical oxygen demand (COD) which is a measure of the oxygen equivalent of electrochemically oxidizable organic fuel to produce electrical energy. The electrodes of the cell were made with nano porous anodized Al coated with Platinum, Platinum-Ruthenium and Platinum-Ruthenium-Carbon. Anodization parameters were optimized by studying E-I characteristics in sulphuric and oxalic acids with variation of concentration and temperature. Pore size in the order of 30–50 nm was obtained by a two stage anodization. The performance of the cell was evaluated by determining open circuit potential, E-I characteristics, polarization studies and cyclic voltammetry. A steady onload potential of 600–800 mV was obtained with current density in the order of 15–25 mA/cm2. High power density of 10–15 mW/cm2 has been obtained with electrode materials coated with Pt+Ru or Pt+Ru+C. The performance of coating on nanoporous structure was much reflected in the polarization studies, which showed a huge reduction of polarization resistance and increase of exchange current density by many times, the effect being more for anode in anodic solution, fermented rice husk, than with cathode in phosphate buffer cathodic solution. The surface morphology examined by SEM, showed nano deposits of Pt, Pt-Ru and the presence of carbon like structure. XRD peaks clearly reveal presence of Pt, Pt-Ru and carbon.

No abstract

No abstract

No abstract