In this work, the plasma generated by the cascaded SinplexProTM plasma spray gun was studied by means of numerical simulation. Special attention is given to the laminarity of the plasma flow. The simulation part is divided into two parts: arcing simulation inside the spray gun and plasma jet simulation outside the spray gun. A laminar as well as a turbulent model is used in each case. The results show that, under the investigated conditions, the internal flow of the plasma torch can be considered as laminar with low turbulence and can, hence, be regarded as quasi-laminar flow. If carrier gas is injected into the plasma jet, the ideal laminar plasma jet is often greatly affected. However, the turbulent plasma jet with low turbulence intensity generated by the cascaded SinplexProTM plasma spray gun is less affected and can remain stable, which is beneficial to the plasma-spraying process.