Computation Fluid Dynamics (CFD) has been employed to calculate the pressure, flow distributions and leakage of brush seal by using Reynolds-Averaged-Navier-Stokes (RANS) method and two-dimensional axisymmetric anisotropic porous medium model. The leakage in brush seal with radial clearance has a marked increase compared with contact brush seal. The leakages of brush seal with different radial clearances have been investigated comparing contact brush seal. A type ofretaining ring structure has been employedto reduce the leakage on radial clearance condition. Also the disturbance effect of retaining ring on bristle pack has been studied.

This article describes the classification of China bank check, green fluorescent reaction under ultraviolet light source illumination of the featured regions—— invisible flower mission and motif pattern, and recognize the accuracy of detecting bank check feature area by signal processing and pattern recognition of UV green fluorescent response signal receiver at particular locations. It described the light filter for bank check, which is different from RMB Banknote

Gas sealing performance of metal seal ring directly affects the security and reliability of equipment operation. Gas static seals of W-ring is taken as a study object, based on the theory of rough surface contact model and the theory of gas average flow model in the rough surface gap, the gas sealing leakage model is established to analyze the relationship between the leakage and the sealing load and surface roughness parameters.

Mechanical seal face texturing has the advantage of improving mechanical seal performance, such as improving opening force, reducing friction coefficient and minimizing wear and so on. In this paper, mechanical seal face, composed of sintered silicon carbon(S-SiC), is textured by the acoustic-optic Q-switched pulsed Nd:YAG laser in multi-mode. The micro-dimples are produced in mechanical seal face, and the profiles are measured by scanning electron microscopy (SEM) and 3D white light interference surface morphology apparatus. Results show that it is in the focus plane that maximal depth and minimum diameter appear and the circular profile of the micro-dimple can be acquired. And the diameter of micro-dimple increases with the increasing of single pulse energy reaching a saturation value at about 3.8mJ, but the increasing of single pulsed energy will reduce the depth of micro-dimple in a small range.

No abstract