Flash floods are the most dangerous kinds of floods because they combine the destructive power of a flood with incredible speed. They occur when heavy rainfall exceeds the ability of the ground to absorb it. The main aim of this study is to generate flash flood maps using Analytical Hierarchy Process (AHP) and Frequency Ratio (FR) models in the river’s floodplain between the Jhelum River and Chenab rivers. A total of eight flash flood-causative physical parameters are considered for this study. Six parameters are based on remote sensing images of the Advanced Land Observation Satellite (ALOS), Digital Elevation Model (DEM), and Sentinel-2 Satellite, which include slope, elevation, distance from the stream, drainage density, flow accumulation, and land use/land cover (LULC), respectively. The other two parameters are soil and geology, which consist of different rock and soil formations, respectively. In the case of AHP, each of the criteria is allotted an estimated weight according to its significant importance in the occurrence of flash floods. In the end, all the parameters were integrated using weighted overlay analysis in which the influence value of drainage density was given the highest weight. The analysis shows that a distance of 2500 m from the river has values of FR ranging from 0.54, 0.56, 1.21, 1.26, and 0.48, respectively. The output zones were categorized into very low, low, moderate, high, and very high risk, covering 7354, 5147, 3665, 2592, and 1343 km2, respectively. Finally, the results show that the very high flood areas cover 1343 km2, or 6.68% of the total area. The Mangla, Marala, and Trimmu valleys were identified as high-risk zones of the study area, which have been damaged drastically many times by flash floods. It provides policy guidelines for risk managers, emergency and disaster response services, urban and infrastructure planners, hydrologists, and climate scientists.