To fabricate high efficiency photoanodes for water oxidation, it is highly required to engineer their nanoporous architecture and interface to improve the charge separation and transport efficiency. By focusing on this aspect, we developed hierarchical nanoporous BiVO 4 (BV) from solution processed twodimensional BiOI (BI) crystals. The orientation of the BI crystals was controlled by changing the solvent volume ratios of ethylene glycol (EG) to ethanol (ET), which resulted in different hierarchical and planar BV morphologies through a chemical treatment followed by thermal heating. The morphology with optimal particle dimension, connectivity, and porosity can offer a highly enhanced electrochemically active surface area (ECSA). The hierarchical BV owning a maximum ECSA showed the best photoelectrochemical (PEC) performance in terms of the highest photocurrent density and charge separation efficiency. However, to further improve the performance of the electrode, conformal and ultrathin SnO 2 underlayers were deposited by a powerful atomic layer deposition technique at the interface to effectively block the defect density, which significantly improved the photocurrents as high as 3.25 mA/cm 2 for sulfite oxidation and 2.55 mA/cm 2 for water oxidation at 0.6 V versus the reversible hydrogen electrode (RHE). The electrode possessed record charge separation efficiency of 97.1% and charge transfer efficiency of 90.1% at 1.23 V RHE among to-date reported BiVO 4 -based photoanodes for water oxidation. Furthermore, a maximum applied bias photon-to-current efficiency (ABPE) of 1.61% was found at a potential as low as 0.6 V RHE , which is highly promising to make a tandem cell. These results indicate that the construction of the hierarchical nanoporous photoanode with an enhanced ECSA and its proper interface engineering can significantly improve the PEC performance.

Extended and oriented rutile nanowires (NWs) hold great promise for numerous applications because of their various tunable physicochemical properties in air and/or solution media, but their direct synthesis on a wide range of conducting substrates remains a significant challenge. Their device performance is governed by relevant NW geometries that cannot be fully controlled to date by varying bulk synthetic conditions. Herein, orientation engineering of rutile SnO2 NWs on a variety of conducting substrates by atomic layer deposition (ALD) seeding has been investigated. The seeded growth controls the nucleation event of the NW, and thicknesses and crystallographic properties of seed layers are the key parameters toward tuning the NW characteristics. The seed layers on carbon cloth produce NWs with highly enhanced electrochemically active surface area, which would show efficient electrochemical CO2 reduction. In addition, the hierarchical architecture resulted from the seeded growth of NWs on SnO2 nanosheets allows thin layers of BiVO4, forming a heterojunction photoanode, which shows a record charge separation efficiency of 96.6% and a charge-transfer efficiency of 90.2% at 1.23 V versus the reversible hydrogen electrode among, to date, the reported BiVO4-based photoanodes for water oxidation. Our study illustrates that such a versatile interfacial engineering effort by the ALD technique would be promising for further wide range of practical applications.

Designing an appropriate oxygen evolution reaction (OER) catalyst for photoelectrochemical (PEC) water splitting is an urgent issue for providing high-efficiency solar to hydrogen energy production. Transition metals have been central...