Organic pollutants can be identified by comparing their electron ionization (EI) mass spectra with those in libraries or obtained from authentic standards. Nevertheless, libraries are incomplete; standards may be unavailable or too costly, or their synthesis may be too time-consuming. This study evaluates the performance of quantum chemical electron ionization mass spectrometry (QCEIMS) vis-à-vis competitive fragmentation modeling (CFM) for suspect screening and unknown identification. EI mass spectra of 35 compounds, including halogenated organics, organophosphorus flame retardants (OPFRs), and disinfection byproducts were computed. Computational results were compared with EI mass spectra compiled in the NIST Library as well as collision-induced dissociation (CID) mass spectra obtained from radical cations M•+ generated by charge-exchange atmospheric pressure chemical ionization (APCI). The results indicate that QCEIMS performs equivalently or better than CFM. Average match factors between computed and experimental (NIST) EI mass spectra were 656 vs 503 for the halogenated organics, and on average, QCEIMS predicted 55% of the products generated by CID vs 17% predicted by CFM. QCEIMS predicted 37% of the OPFR CID products whereas CFM predicted 29%. QCEIMS performed comparably to a commercial combinatorial fragmentation method for suspect screening of a dust sample, identifying 19/20 targets. Examples of unknown pollutants, whose reference spectra were unavailable at the time of discovery, are also presented. The computational results suggest that QCEIMS can help guide the analyst in obtaining authentic standards and raise the possibility that, with advances in computing, an unknown may eventually be confirmed in hours as opposed to the days or months required to obtain authentic standards.

The identity of an unknown environmental pollutant is reflected by the mass and dissociation chemistry of its (quasi)­molecular ion. Gas chromatography–atmospheric pressure chemical ionization–mass spectrometry (GC-APCI-MS) increases the yield of molecular ions (compared to conventional electron ionization) by collisional cooling. Scanning quadrupole data-independent acquisition (SQDIA) permits unbiased, unattended selection of (quasi)­molecular ions and acquisition of structure-diagnostic collision-induced dissociation mass spectra, while minimizing interferences, by sequentially cycling a quadrupole isolation window through the m/z range. This study reports on the development of a suspect screening method based on industrial compounds with bioaccumulation potential. A comparison of false and correct identifications in a mixed standard containing 30 analytes suggests that SQDIA results in a markedly lower false-positive rate than standard DIA: 5 for SQDIA and 82 for DIA. Electronic waste dust was analyzed using GC and quadrupole time-of-flight MS with APCI and SQDIA acquisition. A total of 52 brominated, chlorinated, and organophosphorus compounds were identified by suspect screening; 15 unique elemental compositions were identified using nontargeted screening; 17 compounds were confirmed using standards and others identified to confidence levels 2, 3, or 4. SQDIA reduced false-positive identifications, compared to experiments without quadrupole isolation. False positives also varied by class: 20% for Br, 37% for Cl, 75% for P, and >99% for all other classes. The structure proposal of a previously reported halogenated compound was revisited. The results underline the utility of GC-SQDIA experiments that provide information on both the (quasi)­molecular ions and its dissociation products for a more confident structural assignment.