No abstract

High-frequency magnetic field has been developed pervasively. The induction of heat from the magnetic field can help to treat tumor tissue to a certain extent. Normally, treatment by the low-frequency magnetic field needed to be combined with magnetic substances. To assist in the induction of magnetic fields and reduce flux leakage. However, there are studies that have found that high frequencies can cause heat to tumor tissue. In this paper present, a new magnetic application will focus on the analysis of the high-frequency magnetic nickel core with multi-coil. In order to focus the heat energy using a high-frequency magnetic field into the tumor tissue. The magnetic coil was excited by 915 MHz signal and the combination of tissues used are muscle, bone, and tumor. The magnetic power on the heating predicted by the analytical model, the power loss density (2.98e-6 w/m3) was analyzed using the CST microwave studio.

Heating induction is a new environmentally friendly, energy-saving technology that offers a more effective performance than other common heaters. The energy-use efficiency of an inductor circuit is greater than 80 percent, while a biomass tank and tungsten coil have 70 percent and 51.8 percent efficiency, respectively. This method also produces more heat than any other forms of heating using gas or coal. The induction heating method has attracted significant interest and has seen application worldwide. Based on this important source of heating, we have designed and developed a large induction-heating machine with high energy to heat up a tank directly. The aim is to degrade organic waste as much as possible and convert it into an effective fertilizer by adding mesophilic microorganisms; the fertilizer transforming process takes no more than 24 h. The tank featured in our design has a 100-cm radius and is 155 in length; this is very large. The aim of this process is to reduce the amount of organic waste and thereby provide environmental benefits. To this end, we have designed a large, high-energy induction-heating machine (approximately 9.6 kilowatt) and used two machines in order to appropriately heat the tank for a large amount of organic-waste degradation. This research can be effectively applied to many heating methods in industry.

No abstract

No abstract