Monolithic pectin aerogels, aeropectins, were prepared via dissolution-gelation-coagulation and subsequent drying with supercritical CO2. Aeropectin had pore sizes that varied from mesopores to small macropores and compression moduli in the range from 4 to 18 MPa. Aeropectins show plastic deformation up to 60% strain before the pore walls collapse. Pectin aerogels have a thermal conductivity below that of air in ambient conditions, making them new thermal superinsulating fully biomass-based materials. The contribution of gas and solid conduction plus radiative heat transfer were determined and discussed.

Sets of silica gels: aerogels, xerogels and sintered aerogels, have been studied in the objective to understand the mechanical behavior of these highly porous solids. The mechanical behaviour of gels is described in terms of elastic and brittle materials, like glasses or ceramics. The magnitude of the elastic and rupture modulus is several orders of magnitude lower compared to dense glass. The mechanical behaviours (elastic and brittle) are related to the same kinds of gel characteristics: pore volume, silanol content and pore size. Elastic modulus depends strongly on the volume fraction of pores and on the condensation reaction between silanols. Concerning the brittleness features: rupture modulus and toughness, it is shown that pores size plays an important role. Pores can be OPEN ACCESS Gels 2015, 1 257 considered as flaws in the terms of fracture mechanics and the flaw size is related to the pore size. Weibull's theory is used to show the statistical nature of flaw. Moreover, stress corrosion behaviour is studied as a function of environmental conditions (water and alcoholic atmosphere) and temperature.