Excellent short-term results can be achieved in selected patients with percardiac device closure of subaortic ventricular septal defects.

In this paper, accumulative roll bonding (ARB) has been used to prepare the Al/Mg alloy multilayer structure composite materials with 1060Al sheet and MB2 sheet. The evolution of microstructure of the cladding materials during ARB processes was observed by optical microscope, scanning electron microscopy, and micro-hardness was measured by micro-hardness tester. The results show that a multilayer structure material of Al/Mg alloy with excellent bonding characteristics and fine grained microstructure was prepared by ARB processes. With the ARB cycles increasing, Mg alloy layer in multilayer composite material was necked and fractured, and the hardness of the Al and Mg alloy was increased. Average grain size was less than 1μm after ARB4 cycles.

We successfully treated a case of a 2-year-old male with aortic coarctation coexisting with severe mitral regurgitation via left posteriolateral thoracotomy at one stage. After a mitral valve replacement under perfused ventricular fibrillation with moderate hypothermia, we repaired the aortic coarctation with coarctation resection and end-to-end anastamosis with the aid of deep hypothermic circulatory arrest and selective low-flow cerebral perfusion. The patient had an uneventful hospital course and remains well.