The field of AlGaInN ultraviolet UV light-emitting diodes (LEDs) is reviewed, with a summary of the state-of-the-art in device performance and enumeration of applications. Performance-limiting factors for high-efficiency UV LEDs are identified and recent advances in the development of deep UV emitters are presented.

No abstract

For AlGaN-based multi-quantum-well light emitters grown on c-plane substrates there is a tendency for the polarization of the emitted light to switch from transverse electric (TE) polarization to transverse magnetic (TM) polarization as the wavelength decreases. This transition depends on various factors that include the strain in the quantum well. Experimental results are presented that illustrate the phenomenon for nitride light emitting diodes (LEDs) grown on sapphire and on bulk AlN. Model calculations are presented which quantify the dependence of the TE/TM switch on the quantum well strain and the Al composition in the barriers surrounding the well.

The polarization of the in-plane electroluminescence of (0001) orientated (In)(Al)GaN multiple quantum well light emitting diodes in the ultraviolet-A and ultraviolet-B spectral range has been investigated. The intensity for transverse-electric polarized light relative to the transverse-magnetic polarized light decreases with decreasing emission wavelength. This effect is attributed to rearrangement of the valence bands at the Γ-point of the Brillouin zone with changing aluminum and indium mole fractions in the (In)(Al)GaN quantum wells. For shorter wavelength the crystal-field split-off hole band moves closer to the conduction band relative to the heavy and light hole bands and as a consequence the transverse-magnetic polarized emission becomes more dominant for deep ultraviolet light emitting diodes.

The design and Mg-doping profile of AlN/Al0.7Ga0.3N electron blocking heterostructures (EBH) for AlGaN multiple quantum well (MQW) light emitting diodes (LEDs) emitting below 250 nm was investigated. By inserting an AlN electron blocking layer (EBL) into the EBH, we were able to increase the quantum well emission power and significantly reduce long wavelength parasitic luminescence. Furthermore, electron leakage was suppressed by optimizing the thickness of the AlN EBL while still maintaining sufficient hole injection. Ultraviolet (UV)-C LEDs with very low parasitic luminescence (7% of total emission power) and external quantum efficiencies of 0.19% at 246 nm have been realized. This concept was applied to AlGaN MQW LEDs emitting between 235 nm and 263 nm with external quantum efficiencies ranging from 0.002% to 0.93%. After processing, we were able to demonstrate an UV-C LED emitting at 234 nm with 14.5 μW integrated optical output power and an external quantum efficiency of 0.012% at 18.2 A/cm2.