The purpose of study was to analyze the participants’ opinions concerning the effectiveness of 6 denture adhesives (DA).The study group included 60 participants. Criteria for selecting the patients were as follows: reduced retention and stabilization of maxillary complete dentures and xerostomia. These features were evaluated on basis of clinical examination and standard sialometry tests (u-SFR). Retention of maxillary dentures was scored by modified Kapur index before application of DA. All participants were divided randomly into 6 groups regarding the use of the 6 DA during a 6-month period. After this time, participants completed an HRQL questionnaire.DA noticeably improved retention and stabilization of maxillary complete dentures. DA in the glue form had the best retention effectiveness in participants with xerostomia. These materials are difficult to clean from the denture base. The data are presented in tables and figures.The results of the study collected positive influence of adhesives on retention of dentures in xerostomia patients. The cleaning dentures and denture bearing tissues was difficult.DA help in the use of prostheses, but it is also necessary for the treatment of the causes and symptoms of xerostomia.

No abstract

This research aims at comparing the interactions between the water‐based printing ink and polylactide (PLA) printing base. As a reference base, a polyethylene terephthalate (PET) film was chosen. The wettability of both films was investigated. The Owens–Wendt method was applied to calculate the surface free energy (SFE). The values of SFE and its polar and dispersive components were compared with the surface tension (ST) of the ink and the polar and dispersive components of ST. The wetting envelopes of the investigated PLA and PET films are presented. Finally, the bonding strength between the dried ink layer and the printing base was analyzed. The PET film exhibited higher values of SFE. However, the bonding strength between the dried ink layer and the printing base was higher for PLA films. Our results reveal that PLA films can be an excellent choice as packaging materials, with comparable or even better print quality than conventional fossil‐based plastics.

The surface roughness of the dental restorations is significant to the denture plaque adhesion. Methods: In this work, we present the complex analysis of the electropolished CoCrW alloy remanium ® star (Dentaurum, Germany) samples with laserengraved fiducial marks performed using complementary set of micro-and nanoscopic techniques: optical profilometry (OP), atomic force microscopy (AFM), scanning electron microscopy (SEM) and focused ion beam (FIB) milling. Results: Both mean and RMS roughness of the samples were reduced by electopolishing process, however, the results obtained using OP and AFM exhibited some discrepancies. This was caused by the relatively high local protruding defects developed on the processed surface. The cross-sections of the protrusions were made to analyze the cause of their formation as the EDS elemental content maps revealed that their composition was uniform. We also analyzed the local roughness in the smaller areas free from the defects. Conclusions: In that case, both OP and AFM techniques delivered the same results. Analysis of results showed that various methods used for the surface roughness evaluation have to be used simultaneously to obtain complete and true analysis of the technological CoCrW samples.

No abstract