Abstract. The effect of treatment with activated carbon to the metal content in the reuse of lubricating oil waste has been done. Waste lubricating oil has treatment using 1-butanol and KOH as a solvent and coagulant. The research studies of the effect of activated carbon to the metals are Pb, Cr, Ca, Mg and Fe in lubrication oil waste after treatment. Waste lubricating oil treatment by the adsorption method using activated carbon with various weight are 0,5; 1,0; and 1,5 g. The metal concentrate was analysis after and before treatment using Atomic Adsorption Spectrophotometer (AAS). The analysis result shown the best weight of activated carbon for decreased of metals contains in lubricating oil waste is 1.5 g. Metal concentration of Pb, Cr, Ca, Mg and Fe in lubricating oil waste before treatment are 181.0002, 10.7198, 1019.0220, 325.8788 and 365.1329 mg/L (ppm), respectively. Metal concentration of Pb, Cr, Ca, Mg and Fe in lubricating oil waste after treatment are 47.5670, not detection, 2.6871, 44.3251 and 222.043 mg/L (ppm), respectively. Base on ASTM D5185 standard shown the Ca, Mg and Cr metals concentration according to the new lubricating oil quality standard. Pb and Fe metals concentration after process are still above the new lubricating oil quality standard. As a conclusion is activated carbon is a good material for treatment of waste lubricating oil, especially to reduce metal concentrations.