No abstract

No abstract

The aim of this study was to evaluate the change in colorimetric patterns and the termite resistance of light-colored and low durability wood when impregnated with teak (Tectona grandis) heartwood extractives. Hot water and ethanol extracts were obtained from 20-year-old teak heartwood and used to evaluate the influence on color change and the natural resistance of 10-year-old teak sapwood and Pinus sp. For wood impregnation, a full-cell (Bethell) treatment was conducted. To verify the influence of the teak extracts, the colorimetric patterns of wood were determined using the Munsell and CIE-L*a*b* systems. Choice and no-choice feeding tests were performed under laboratory conditions to test the efficacy of the teak extract solutions against two termite species Nasutitermes corniger and Cryptotermes brevis. All of the extract solutions promoted a significant darkening of the wood, bringing the color of the impregnated wood closer to older teak heartwood than the untreated samples of the respective species. Ethanol extracts increased the resistance and mortality against N. corniger in both choice and no-choice tests. Resistance to C. brevis was not clearly affected.

RESUMOObjetivou-se avaliar a resistência de aglomerados confeccionados com madeira de Acacia mangium Willd. colada com adesivo à base de ureia-formaldeído e taninos a organismos xilófagos. Os painéis foram produzidos com 40 × 40 × 1,27 cm (largura × comprimento × espessura); ao adesivo, foram adicionados 10, 20 e 30% de taninos, sendo empregadas quatro razões de compactação (1,39; 1,55; 1,73 e 2,00). Nos ensaios com fungos e térmitas, utilizaram-se amostras de 2,50 × 2,50 × 1,27 cm (largura × comprimento × espessura ABSTRACTThis study aimed to evaluate the resistance of particleboards made of Acacia mangium Willd. wood, bonded with urea-formaldehyde and tannins as adhesive, against xylophagous organisms. Panels of 40 × 40 × 1.27 cm (width x length x thickness) were produced; 10, 20 and 30% of tannins were added to the adhesive; four compaction ratios (1.39; 1.55; 1.73 and 2.00) were employed. Samples of 2.50 × 2.50 × 1.27 cm (width x length x thickness) were used in the tests with fungi and termites. Gloeophyllum trabeum and Trametes versicolor (12 weeks) fungi and Nasutitermes sp. (45 days) termites were employed in the tests. Panels with the highest compaction ratio and proportion of tannins provided the most effective resistance to Gloeophyllum trabeum. No difference between the adhesives and compaction ratios was observed for Trametes versicolor. Gloeophyllum trabeum caused greater mass loss than Trametes versicolor. The samples were completely consumed by the termites.

This study aimed to evaluate the decay potential of fungi isolated from plantations of Eucalyptus spp. for biological stump removal. Therefore, an accelerated decay test was performed with fungi isolated from stumps of Eucalyptus spp.: Phanerochaete chrysosporium, Cladosporium sp., Penicillium sp., Penicillium implicatum, Resinicium confertum, Trichoderma citrinoviride and Acremonium sp. Chemical analysis of the decayed wood was performed on samples submitted to the most degrading fungi. A field test on eucalyptus stumps, with two methods of inoculation and covering, was performed to evaluate the stumps deterioration by the isolated fungi. Acremonium sp., Cladosporium sp. and P. chrysosporium showed the highest potential in the accelerated decay test. Chemical analysis of the decayed wood indicated the selectivity of fungi for lignin. No significant variations were observed in the field test compared to the control stumps. Biological stump removal shows both environmental and economic potential and needs to be thoroughly studied.