Suspended solids in the injection water cause impairment of water injectivity during waterflooding operations. Suspended solids affect reservoir properties and decrease the permeability of reservoir rocks causing an increase of injection pressure and a decrease in water injectivity. Removal of all suspended solids from injection water is an expensive and economically unfeasible process. To minimize the effects of suspended solids to the formation, it is necessary to determine an impairment mechanism of suspended solids on oil displacement and, therefore, optimize the water treatment process. In this paper, an analytical model that describes the relationship between injection water quality and impairment mechanisms on oil displacement is presented. A formation impairment was calculated, introducing the parameter called impairment ratio, which represents the ratio between suspended solids and pore size distribution of reservoir rock. Based on the impairment ratio, decreases in porosity and permeability were calculated with changes in capillary pressure, relative permeability, and displacement efficiency. The model was tested for three different types of injection water. Results indicated the presence of formation impairment even with the smallest particles. Suspended solids had the greatest influence on porosity and permeability impairment. The model could be used as input for reservoir modelling studies for monitoring and controlling displacement efficiency during waterflooding as well as for planning and modification of water treatment units.

No abstract

One of the most important parameters in an edge detection process is setting up the proper threshold value. However, that parameter can be different for almost each image, especially for infrared (IR) images. Traditional edge detectors cannot set it adaptively, so they are not very robust. This paper presents optimization of the edge detection parameter, i.e. threshold values for the Canny edge detector, based on the genetic algorithm for rail track detection with respect to minimal value of detection error. First, determination of the optimal high threshold value is performed, and the low threshold value is calculated based on the well-known method. However, detection results were not satisfactory so that, further on, the determination of optimal low and high threshold values is done. Efficiency of the developed method is tested on set of IR images, captured under night-time conditions. The results showed that quality detection is better and the detection error is smaller in the case of determination of both threshold values of the Canny edge detector.

No abstract

A B S T R A C T Insufficient export activity and low level of investment in the formation of gross domestic product are a negative feature of the Serbian economy over a longer period of time. The global financial and economic crisis has shown that a sustainable model of economic growth, which was basically based on the growth of domestic consumption and imports and a low share of investments in the structure of the use of GDP, is an unsustainable until then. It has become clear that such a model must be replaced by a pro-investment and export-oriented model of economic growth. Bearing in mind the trends in macroeconomic flows in the Serbian economy, it is clear that the increase in investment and the competitiveness of domestic production imposes itself as one of the most important tasks of economic policy in the future. In this sense, the main goal of this.