CO2 adsorption/desorption onto/from tetraethylenepentamine (TEPA) films of 4, 10, and 20 μm thicknesses were studied by in situ attenuated total reflectance (ATR) and diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) techniques under transient conditions. Molar absorption coefficients for adsorbed CO2 were used to determine the CO2 capture capacities and amine efficiencies (CO2/N) of the films in the DRIFTS system. Adsorption of CO2 onto surface and bulk NH2 groups of the 4 μm film produced weakly adsorbed CO2, which can be desorbed at 50 °C by reducing the CO2 partial pressure. These weakly adsorbed CO2 exhibit low ammonium ion intensities and could be in the form of ammonium-carbamate ion pairs and zwitterions. Increasing the film thickness enhanced the surface amine-amine interactions, resulting in strongly adsorbed ion pairs and zwitterions associated with NH and NH2 groups of neighboring amines. These adsorbed species may form an interconnected surface network, which slowed CO2 gas diffusion into and diminished access of the bulk amine groups (or amine efficiency) of the 20 μm film by a minimum of 65%. Desorption of strongly adsorbed CO2 comprising the surface network could occur via dissociation of NH3(+)/NH2(+)···NH2/NH ionic hydrogen bonds beginning from 60 to 80 °C, followed by decomposition of NHCOO(-)/NCOO(-) at 100 °C. These results suggest that faster CO2 diffusion and adsorption/desorption kinetics could be achieved by thinner layers of liquid or immobilized amines.

CO2 diffusion limitations and readsorption of desorbed CO2 during removal from immobilized amine sorbents could significantly reduce the effectiveness of CO2 capture processes. To decouple CO2 diffusion from desorption/readsorption on silica and tetraethylenepentamine (TEPA)/silica sorbents, a new transient diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) method was carried out by using benzene as a surrogate probe molecule. Comparison of the infrared intensity profiles of adsorbed CO2 and Si–OH (which adsorbs benzene) revealed that slow rates of CO2 uptake and desorption are a result of (i) CO2 diffusion through an interconnected network produced from CO2 adsorbed inside of the amine/silica sorbent pores and (ii) readsorption of CO2 on the amine sites inside of the pores and at the external surface of the sorbents. High rates of CO2 adsorption/desorption onto/from the immobilized amine sorbents could be achieved by sorbents with low amine density at the external surfaces and pore mouths.

Hybrid Class 1/Class 2 supported amine CO2 sorbents demonstrate superior performance under practical steam conditions, yet their amine immobilization and stabilization mechanisms are unclear. Uncovering the interactions responsible for the sorbents' robust features is critical for further improvements and can facilitate practical applications. We employ solid state (29)Si CP-MAS and 2-D FSLG (1)H-(13)C CP HETCOR NMR spectroscopies to probe the overall molecular interactions of aminosilane/silica, polyamine [poly(ethylenimine), PEI]/silica, and hybrid aminosilane/PEI/silica sorbents. A unique, sequential impregnation sorbent preparation method is executed in a diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) setup to decouple amine binding mechanisms at the amine-silica interface from those within bulk amine layers. These mechanisms are correlated with each sorbents' resistance to accelerated liquid H2O and TGA steam treatments (H2O stability) and to oxidative degradation (thermal stability). High percentages of CO2 capture retained (PCR) and organic content retained (OCR) values after H2O testing of N-(3-(trimethoxysilyl)propyl)ethylenediamine (TMPED)/PEI and (3-aminopropyl)trimethoxysilane (APTMS)/PEI hybrid sorbents are associated with a synergistic stabilizing effect of the amine species observed during oxidative degradation (thermal gravimetric analysis-differential scanning calorimetry, TGA-DSC). Solid state NMR spectroscopy reveals that the synergistic effect of the TMPED/PEI mixture is manifested by the formation of hydrogen-bonded PEI-NH2···NH2-TMPED and PEI-NH2···HO-Si/O-Si-O (TMPED, T(2)) linkages within the sorbent. DRIFTS further determines that PEI enhances the grafting of TMPED to silica and that PEI is dispersed among a stable network of polymerized TMPED in the bulk, utilizing H-bonded linkages. These findings provide the scientific basis for establishing a Class 4 category for aminosilane/polyamine/silica hybrid sorbents.

Rapid testing of hydrophilic and hydrophobic basic immobilized amine sorbents (BIAS) for CO2 capture stability under practical conditions was achieved by direct contact of the sorbents with flowing liquid water. Losses in both CO2 capture capacity and amine content of sorbents after exposure to 0.5 mL min(-1) of H2 O at 25 °C for 40 min followed similar trends as losses observed after exposure to N2 /steam (105 °C, 7 % H2 O) for 10 h. We also found that hydrophobic TMPED helped stabilize sorbents to H2 O, which was confirmed by DRIFTS and combined TGA-DSC.