No abstract

A three-dimensional computational model is developed for simulating the flag motion in a uniform flow. The nonlinear dynamics of the coupled fluid–flag system after setting up of flapping is investigated by a series of numerical tests. At low Reynolds numbers, the flag flaps symmetrically about its centreline when gravity is excluded, and the bending in the spanwise direction is observed near the corners on the trailing edge. As the Reynolds number increases, the spanwise bending is flattened due to the decrease of the positive pressure near the side edges as well as the viscous force of the fluid. At a certain critical Reynolds number, the flag loses its symmetry about the centreline, which is shown to be related to the coupled fluid–flag instability. The three-dimensional vortical structures shed from the flag show a significant difference from the results of two-dimensional simulations. Hairpin or O-shaped vortical structures are formed behind the flag by connecting those generated at the flag side edges and the trailing edge. Such vortical structures have a stabilization effect on the flag by reducing the pressure difference across the flag. Moreover, the positive pressure near the side edges is significantly reduced as compared with that in the center region, causing the spanwise bending. The Strouhal number defined based on the flag length is slightly dependent on the Reynolds number and the flag width, but scales with the density ratio as St ~ ρ−1/2). On the other hand, the flapping-amplitude-based Strouhal number remains close to 0.2, consistent with the values reported for flying or swimming animals. A flag flapping under gravity is then simulated, which is directed along the negative spanwise direction. The sagging down of the flag and the rolling motion of the upper corner are observed. The dual effects of gravity are demonstrated, i.e. the destabilization effect like the flag inertia and the stabilization effect by increasing the longitudinal tension force.

No abstract

We present an improved immersed boundary method for simulating incompressible viscous flow around an arbitrarily moving body on a fixed computational grid. To achieve a large Courant–Friedrichs–Lewy number and to transfer quantities between Eulerian and Lagrangian domains effectively, we combined the feedback forcing scheme of the virtual boundary method with Peskin's regularized delta function approach. Stability analysis of the proposed method was carried out for various types of regularized delta functions. The stability regime of the 4‐point regularized delta function was much wider than that of the 2‐point delta function. An optimum regime of the feedback forcing is suggested on the basis of the analysis of stability limits and feedback forcing gains. The proposed method was implemented in a finite‐difference and fractional‐step context. The proposed method was tested on several flow problems, including the flow past a stationary cylinder, inline oscillation of a cylinder in a quiescent fluid, and transverse oscillation of a circular cylinder in a free‐stream. The findings were in excellent agreement with previous numerical and experimental results. Copyright © 2008 John Wiley & Sons, Ltd.

The immersed boundary method is a methodology for dealing with boundary conditions at fluid–fluid and fluid–solid interfaces. The immersed boundary method has been attracting growing attention in the recent years due to its simplicity in mesh processing. Great effort has been made to develop its new features and promote its applications in new areas. This review is focused on assessing the immersed boundary method fundamentals and the latest progresses especially the strategies to address the challenges and the applications of the immersed boundary method. Various numerical examples are also presented for demonstrating the capability of the immersed boundary method, including blood flow and blood cells, flapping flag, flow around a hoverfly, turbulence flow over a wavy boundary, shock wave-induced vibration, and acoustic waves scattered by a cylinder and a sphere. The major challenges and several open issues in this field are highlighted.