No abstract

Emergency resource is important for people evacuation and property rescue when accident occurs. The relief efforts could be promoted by a reasonable emergency resource allocation schedule in advance. As the marine environment is complicated and changeful, the place, type, severity of maritime accident is uncertain and stochastic, bringing about dynamic demand of emergency resource. Considering dynamic demand, how to make a reasonable emergency resource allocation schedule is challenging. The key problem is to determine the optimal stock of emergency resource for supplier centers to improve relief efforts. This paper studies the dynamic demand, and which is defined as a set. Then a maritime emergency resource allocation model with uncertain data is presented. Afterwards, a robust approach is developed and used to make sure that the resource allocation schedule performs well with dynamic demand. Finally, a case study shows that the proposed methodology is feasible in maritime emergency resource allocation. The findings could help emergency manager to schedule the emergency resource allocation more flexibly in terms of dynamic demand.

No abstract

No abstract

The diametral indirect tension test is a convenient configuration for determining the modulus of asphalt concrete samples. The resilient modulus test has been a traditional approach to characterizing the stiffness of asphalt concrete, but it leaves much to be desired when considering the viscous behavior this material exhibits, even at low temperatures. A method for determining the complex compliance, complex modulus, and phase angle of asphalt mixtures using the indirect tensile test and a haversine load history is presented here. This test may be performed over a range of frequencies and temperatures as demonstrated on materials used in the Minnesota Road Research Project. The use of the haversine loading simplifies the test when compared with the pulse loading and rest time used in the resilient modulus test, and it allows for the characterization of the elastic and viscous components of the material's overall behavior, which is very difficult, at best, with the current test methods.