No abstract

No abstract

No abstract

This paper deals with ablation of a solid by a high temperature liquid jet. This phenomenon is a key issue to maintain the vessel integrity during the course of a nuclear reactor severe accident with melting of the core. Depending on the course of such an accident, high temperature corium jets might impinge and ablate the vessel material leading to its potential failure. Since Fukushima Daiichi accident, new mitigation measures are under study. As a designed safety feature of a future European SFR, bearing the purpose of quickly draining of the corium out of the core and protecting the reactor vessel against the attack of molten melt, the in-core corium is relocated via discharge tubes to an in-vessel core-catcher has been planned. The core-catcher design to withstand corium jet impingement demands the knowledge of very complex phenomena such as the dynamics of cavity formation and associated heat transfers. Even studied in the past, no complete data are available concerning the variation of jet parameters and solid structure materials. For a deep understanding of this phenomenon, new tests have been performed using both simulant and prototypical jet and core catcher materials. Part of these tests have been done at University of Lorraine using hot liquid water impinging on transparent ice block allowing for the visualizations of the cavity formation. Other tests have been performed in Karlsruhe Institute of Technology using liquid steel impinging on steel block.

Behavior of the corium pool in the lower head is still a critical issue in understanding of Pressurized Water Reactor (PWR) core meltdown accidents. One of the key parameter for assessing the vessel mechanical strength is the resulting heat flux at the pool-vessel interface. A number of studies [1]-[3] have already been performed to pursue the understanding of a severe accident with core melting, its course, major critical phases and timing and the influence of these processes on the accident progression. Uncertainties in modeling these phenomena and in the application to reactor scale will undoubtedly persist. These include e.g. formation and growth of the in-core melt pool, relocation of molten material after the failure of the surrounding crust, characteristics of corium arrival in residual water in the lower head, corium stratifications in the lower head after the debris re-melting [4]. These phenomena have a strong impact on a potential termination of a severe accident. The main objective of the LIVE program [5] at Karlsruhe Institute of Technology (KIT) is to study the core melt phenomena both experimentally in large-scale 3D geometry and in supporting separate-effects tests, and analytically using CFD codes in order to provide a reasonable estimate of the remaining uncertainty band under the aspect of safety assessment. Within the LIVE experimental program several tests have been performed with water and with non-eutectic melts (mixture of KNO 3 and NaNO 3) as simulant fluids. The results of these experiments, performed in nearly adiabatic and in isothermal conditions, allow a direct comparison with findings obtained earlier in other experimental programs (SIMECO, ACOPO, BALI, etc.) and will be used for the assessment of the correlations derived for the molten pool behavior. The information obtained from the LIVE experiments includes heat flux distribution through the reactor pressure vessel wall in transient and steady state conditions, crust growth velocity and dependence of the crust formation on the heat flux distribution through the vessel wall. Supporting posttest analysis contributes to characterization of solidification processes of binary non-eutectic melts. Complimentary to other international programs with real corium melts, the results of the LIVE activities provide data for a better understanding of incore corium pool behavior. The experimental results are being used for development of mechanistic models to describe the incore molten pool behavior and their implementation in the severe accident codes like ASTEC. The paper summarizes the objectives of the LIVE program and presents the main results obtained in the LIVE experiments up to now.