With the development of offshore oil and gas field enters into deep water constantly, subsea production system has become the main development mode in deep water development. Pipeline End Termination (PLET) is common facilities in subsea production system and is used to provide subsea tieback interface. An embedded type PLET has been adopted in Panyu 35-1/35-2 Gas field with the water depth of 194 to 338 m. Factory Accept Test (FAT) is very important for the subsea production facilities, and the references is very limited due to technical security. This paper in detail states the flow chart, master equipment, purpose and precautions for each test of FAT for PLET, which collects great technology for the development of subsea production system.

With the development of offshore oil and gas field enters into deep water constantly, subsea production system has become the main development mode in deep water development. Subsea Inline manifold (ILM) is common facilities in subsea production system and is used to gather oil and gas from the side subsea wells. Two subsea ILMs has been adopted in Panyu 35-1/35-2 Gas field with water depth range from 194 to 338 m in South China Sea. System integration test (SIT) is very important for the subsea production facilities. This paper states the flow chart, master equipment, purpose and precautions for each test of ILM SIT, which collects great technology for the development of subsea production system.

Based on CREO Parametric 2.0, programmed by Pro/TOOLKIT and used Visual Studio as a developing platform, the virtually loaded path-planning module targets the dismantlement of tooling spring pin as an investigated object, thus enhancing the efficiency of virtual device significantly.

This paper was prepared for presenlat!cf! al the Offshore TechnolwY Ccmference fwld In Ho.mton TeXSS, 6-9 !.ay 1W Thm paF%r was selected for presentat wn by the OTC Prcgram Committee following revmw' of !nformatum contained In an abstract subintted by the autfwr(s) Contents of the paper as presenled, have not bean rev!ewed by the Offshole Technology and are subject to CorrectIon by the author(s) The material, as presented, does not nec.nssarIIY raflacf any posmon of the Offshore Technology Conference or Its offcers Permlssoon to copy IS restmted 10 an abstract of not more than X30 words Ii!ustratmns may not ba ccpedThe absfract should Wntaln conspicuous acknowfedgemenl of where and by whom the pap+r was pW3antfKf