Atomically dispersed and nitrogencoordinated single metal sites embedded in carbon (denoted as M-N-C) have emerged as promising platinum-groupmetal-free (PGM-free) catalysts for the oxygen reduction reaction (ORR) cathode in proton-exchange-membrane fuel cells (PEMFCs). [1-5] The MN 4 (M: Fe, Co, or Mn) moieties have been theoretically predicted and then experimentally verified as the active sites in M-N-C catalysts. [6-13] Among the many studied precursors, zinc-based zeolitic imidazolate frameworks (ZIF-8s) are effective in creating atomically dispersed MN 4 sites embedded in defect-rich carbon during the hightemperature carbonization. [8,10,14-17] Despite their encouraging ORR activity demonstrated in aqueous acidic electrolytes recently, [18] the trend is often difficult to reproduce in the membrane electrode assemblies (MEAs) of PEMFCs using solid-state electrolytes (i.e., Nafion) (Table S1, Supporting Information). [19] Low catalyst utilization, severe carbon corrosion, and inferior mass transport within the Increasing catalytic activity and durability of atomically dispersed metalnitrogen-carbon (M-N-C) catalysts for the oxygen reduction reaction (ORR) cathode in proton-exchange-membrane fuel cells remains a grand challenge. Here, a high-power and durable CoN -C nanofiber catalyst synthesized through electrospinning cobalt-doped zeolitic imidazolate frameworks into selected polyacrylonitrile and poly(vinylpyrrolidone) polymers is reported. The distinct porous fibrous morphology and hierarchical structures play a vital role in boosting electrode performance by exposing more accessible active sites, providing facile electron conductivity, and facilitating the mass transport of reactant. The enhanced intrinsic activity is attributed to the extra graphitic N dopants surrounding the CoN 4 moieties. The highly graphitized carbon matrix in the catalyst is beneficial for enhancing the carbon corrosion resistance, thereby promoting catalyst stability. The unique nanoscale X-ray computed tomography verifies the well-distributed ionomer coverage throughout the fibrous carbon network in the catalyst. The membrane electrode assembly achieves a power density of 0.40 W cm −2 in a practical H 2 /air cell (1.0 bar) and demonstrates significantly enhanced durability under accelerated stability tests. The combination of the intrinsic activity and stability of single Co sites, along with unique catalyst architecture, provide new insight into designing efficient PGM-free electrodes with improved performance and durability.

Single-metal site catalysts have exhibited highly efficient electrocatalytic properties due to their unique coordination environments and adjustable local structures for reactant adsorption and electron transfer. They have been widely studied for many electrochemical reactions, including oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). However, it remains a significant challenge to realize high-efficiency bifunctional catalysis (ORR/OER) with single-metal-type active sites. Herein, we report atomically dispersed Fe–Co dual metal sites (FeCo–NC) derived from Fe and Co co-doped zeolitic imidazolate frameworks (ZIF-8s), aiming to build up multiple active sites for bifunctional ORR/OER catalysts. The atomically dispersed FeCo–NC catalyst shows excellent bifunctional catalytic activity in alkaline media for the ORR (E 1/2 = 0.877 V) and the OER (E j=10 = 1.579 V). Moreover, its outstanding stability during the ORR and the OER is comparable to noble-metal catalysts (Pt/C and RuO2). The atomic dispersion state, coordination structure, and the charge density difference of the dual metal site FeCo–NC were characterized and determined using advanced physical characterization and density functional theory (DFT) calculations. The FeCo–N6 moieties are likely the main active sites simultaneously for the ORR and the OER with improved performance relative to the traditional single Fe and Co site catalysts. We further incorporated the FeCo–NC catalyst into an air electrode for fabricating rechargeable and flexible Zn–air batteries, generating a superior power density (372 mW cm–2) and long-cycle (over 190 h) stability. This work would provide a method to design and synthesize atomically dispersed multi-metal site catalysts for advanced electrocatalysis.

Ammonia (NH3) electrosynthesis gains significant attention as NH3 is essentially important for fertilizer production and fuel utilization. However, electrochemical nitrogen reduction reaction (NRR) remains a great challenge because of low activity and poor selectivity. Herein, a new class of atomically dispersed Ni site electrocatalyst is reported, which exhibits the optimal NH3 yield of 115 µg cm−2 h−1 at –0.8 V versus reversible hydrogen electrode (RHE) under neutral conditions. High faradic efficiency of 21 ± 1.9% is achieved at ‐0.2 V versus RHE under alkaline conditions, although the ammonia yield is lower. The Ni sites are stabilized with nitrogen, which is verified by advanced X‐ray absorption spectroscopy and electron microscopy. Density functional theory calculations provide insightful understanding on the possible structure of active sites, relevant reaction pathways, and confirm that the Ni‐N3 sites are responsible for the experimentally observed activity and selectivity. Extensive controls strongly suggest that the atomically dispersed NiN3 site‐rich catalyst provides more intrinsically active sites than those in N‐doped carbon, instead of possible environmental contamination. This work further indicates that single‐metal site catalysts with optimal nitrogen coordination is very promising for NRR and indeed improves the scaling relationship of transition metals.

Carbon-supported nitrogen-coordinated single-metal site catalysts (i.e., MÀ NÀ C, M: Fe, Co, or Ni) are active for the electrochemical CO 2 reduction reaction (CO 2 RR) to CO. Further improving their intrinsic activity and selectivity by tuning their NÀ M bond structures and coordination is limited. Herein, we expand the coordination environments of MÀ NÀ C catalysts by designing dual-metal active sites. The Ni-Fe catalyst exhibited the most efficient CO2RR activity and promising stability compared to other combinations. Advanced structural characterization and theoretical prediction suggest that the most active N-coordinated dual-metal site configurations are 2N-bridged (Fe-Ni)N 6 , in which FeN 4 and NiN 4 moieties are shared with two N atoms. Two metals (i.e., Fe and Ni) in the dual-metal site likely generate a synergy to enable more optimal *COOH adsorption and *CO desorption than single-metal sites (FeN 4 or NiN 4 ) with improved intrinsic catalytic activity and selectivity.

Atomically dispersed and nitrogen coordinated single metal sites (M-N-C,M= Fe,Co, Ni, Mn) are the popular platinum group-metal (PGM)-free catalysts for many electrochemical reactions.Traditional wet-chemistry catalyst synthesis often requires complex procedures with unsatisfied reproducibility and scalability.H ere,w er eport af acile chemical vapor deposition (CVD) strategy to synthesize the promising M-N-C catalysts.T he deposition of gaseous 2-methylimidazole onto M-doped ZnO substrates,f ollowed by an in situ thermal activation, effectively generated single metal sites well dispersed into porous carbon. In particular,a no ptimal CVDderived Fe-N-C catalyst exclusively contains atomically dispersed FeN 4 sites with increased Fe loading relative to other catalysts from wet-chemistry synthesis.T he catalyst exhibited outstanding oxygen-reduction activity in acidic electrolytes, which was further studied in proton-exchange membrane fuel cells with encouraging performance.