Both cellulose nanocrystals (CNCs) and cellulose nanofibrils (CNFs) are nanoscale cellulose fibers that have shown reinforcing effects in polymer nanocomposites. CNCs and CNFs are different in shape, size and composition. This study systematically compared their morphologies, crystalline structure, dispersion properties in polyethylene oxide (PEO) matrix, interactions with matrix, and the resulting reinforcing effects on the matrix polymer. Transparent PEO/CNC and PEO/CNF nanocomposites comprising up to 10 wt % nanofibers were obtained via solution casting. Scanning electron microscopy (SEM), wide-angle X-ray diffraction (WXRD), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), dynamic mechanical analyzer (DMA), and tensile testing were used to examine the above-mentioned properties of nanocellulose fibers and composites. At the same nanocellulose concentration, CNFs led to higher strength and modulus than did CNCs due to CNFs' larger aspect ratio and fiber entanglement, but lower strain-at-failure because of their relatively large fiber agglomerates. The Halpin-Kardos and Ouali models were used to simulate the modulus of the composites and good agreements were found between the predicted and experimental values. This type of systematic comparative study can help to develop the criteria for selecting proper nanocellulose as a biobased nano-reinforcement material in polymer nanocomposites.

CitationThe temperature-dependent microstructure of PEDOT/PSS films: insights from morphological, mechanical and electrical analyses 2014, 2 (46)

Highly conductive and stretchable fibers are crucial components of wearable electronics systems. Excellent electrical conductivity, stretchability, and wearability are required from such fibers. Existing technologies still display limited performances in these design requirements. Here, achieving highly stretchable and sensitive strain sensors by using a coaxial structure, prepared via coaxial wet spinning of thermoplastic elastomer‐wrapped carbon nanotube fibers, is proposed. The sensors attain high sensitivity (with a gauge factor of 425 at 100% strain), high stretchability, and high linearity. They are also reproducible and durable. Their use as safe sensing components on deformable cable, expandable surfaces, and wearable textiles is demonstrated.

The development of strain sensors featuring both ultra high sensitivity and high stretchability is still a challenge. We demonstrate that strain sensors based on fragmented single-walled carbon nanotube (SWCNT) paper embedded in poly(dimethylsiloxane) (PDMS) can sustain their sensitivity even at very high strain levels (with a gauge factor of over 10 at 50% strain). This record sensitivity is ascribed to the low initial electrical resistance (5-28 Ω) of the SWCNT paper and the wide change in resistance (up to 10 Ω) governed by the percolated network of SWCNT in the cracked region. The sensor response remains nearly unchanged after 10 000 strain cycles at 20% proving the robustness of this technology. This fragmentation based sensing system brings opportunities to engineer highly sensitive stretchable sensors.