No abstract

Unsatisfying state of domestic highways՚ road surface and low technical quality of domestic cars lead to high accident rate on roads. Accidents involving large vehicles equipped with 20–22 m3 tanks transporting fuel and aggressive liquid chemicals are particularly serious. The article considers the problem of creating on-tank vehicles direction stability systems with digital stabilizer, which provides high accuracy of stabilization of the car body in emergency braking due to the use of stabilizer algorithms of platformless inertial systems, as well as the choice of certain values of variable stabilizer parameters. The mathematical model of perturbed motion of the stabilization object considers the oscillations of the free surface of the transported liquid, which allowed to study the effect of these oscillations on the stability of a closed stabilization system and accordingly choose the range of allowable values of variable parameters. This computational procedure is a combination of two optimization methods — the scan grid method of Sobol for finding the global minimum zone and the Nelder-Mead method, which is implemented by the software product «Optimization Toolbox» of MathLAB package. The procedure also, in parallel with the numerical solution of the optimization problem, selects the values of the weights of the additive functional. As a result of solving the problem of parametric synthesis, the values of the varied parameters of the digital stabilizer are obtained, which provide high accuracy of stabilization of the tanker car body relative to a given trajectory in the mode of emergency braking.

To describe the disturbed movement of a car with a tank, a discrete mathematical model has been compiled, which allows one to take into account the oscillations of the free surface of the liquid and determine their effect on the directional stability of the car during uniform movement and during emergency braking. Linearization is carried out and an equation is obtained for the natural frequencies of oscillations of the electrohydromechanical system, which combines dynamic changes in the parameters of the movement of a car with a tank, partial layers of liquid in a tank and the operation of an electromagnetic drive of the control valve and an electronic PID controller for a two-circuit scheme to ensure directional stability. It is shown that low-frequency oscillations of the free surface of liquid lead to a significant reduction in the stability region, which indicates the need to take such oscillations into account when solving problems of analysis and synthesis of this system. It has been established that for a car with a tank, where low-frequency transverse oscillations of the liquid occur, which are accompanied by redistribution of mass and disturb the movement, an increase in the speed unambiguously leads to a deterioration in road-holding ability. This made it possible to exclude the speed from the variable parameters and significantly simplify the task. It was found that the liquid level in the tank, taking into account its connection with the maximum speed, has an ambiguous effect on the road-holding ability of the vehicle, and it is unacceptable to limit the research to calculations for 50 % of the load. Instead of this traditional simplification, it is necessary to find a line that bends from above those stability boundaries that correspond to many liquid levels from the entire range of their variation. It is shown that the dynamics of emergency braking weakly depends on the viscosity of the liquid in the tank, but with long-term continuous operation of the brake control system, self-oscillations appear in it. A method for tuning the parameters of an electronic regulator for low-amplitude self-oscillations is proposed.

The existing publications that investigate vehicle course stability optimization were analyzed. A mathematical model, which describes the disturbed movement of a car with a tank, was compiled. This model allows to consider the liquid free surface oscillations and determine their effect on the car course stability during constant motion or emergency braking. There was described the main information regarding the car that was used to perform mathematical calculations. An algorithm was developed for deriving the characteristic equation for a complex system of differential equations describing dynamic changes in the movement parameters of a car, oscillations of partial layers of liquid in a tank and the operation of an electromagnetic drive of the control valve and an electronic PID controller for a two-circuit system for ensuring course stability. Based on the developed mathematical model, the influence of forced oscillations of the fluid on the stability area of the system built in the plane of variable parameters of the controller is investigated. It is shown that low-frequency oscillations of the free surface of a liquid lead to a significant reduction in the stability area, which indicates the need to consider such oscillations when solving problems of analysis and synthesis of this system. It was found that for a car with a tank, where low-frequency transverse oscillations of the liquid occur, which are accompanied by a redistribution of mass and disturb the movement, an increase of the speed unambiguously leads to a deterioration in directional stability. That enables exclusion of speed from the number of variable parameters and significantly simplify the problem being solved. The calculations for cases with different loading levels were performed. It was found out that the level of liquid in the tank, considering its relationship with the speed, has an ambiguous effect on the car course stability, and it is unacceptable to limit the research calculations to the case with 50 % load. Instead of this, it is necessary to find a line that bends from above the stability boundaries that correspond to many liquid levels. Keywords: fluid vibrations; exchange rate stability system; area of stability; tank; PID-controller; parameters.