No abstract

No abstract

The objectives of this study are to systematically investigate the delayed hydride cracking (DHC) velocity and the threshold-stress intensity factor, K IH , of a Zr-2.5Nb pressure tube as a function of orientation and elucidate the cause of this anistropic DHC behavior. The DHC velocity as a function of orientation was determined using flattened cantilever beam specimens with 60 ppm H while the threshold-stress intensity factor K IH , was evaluated as a function of orientation on the curved compacttension (CT) and cantilever-beam (CB) specimens charged with hydrogen to 200 ppm H. To infer a difference in a stress gradient ahead of the crack tip as a function of orientation, tensile tests were conducted at temperatures ranging from room temperature (RT) to 560 ЊC using small tensile specimens of 2-mm-gage length taken from three directions of the tube. A textural change was investigated by comparing the inverse pole figures before and after DHC while the {1017} pole figures were constructed to find out the growth pattern of the DHC crack as a function of orientation. Faster DHC velocity and lower K IH were obtained over temperatures of 170 ЊC to 270 ЊC, when the DHC crack grew in the longitudinal direction of the Zr-2.5Nb pressure tube. The strain hardening after yielding and the extent of the textural change accompanied by DHC were higher in the longitudinal direction of the tube, suggesting a higher stress gradient ahead of the crack tip. Thus, the anisotropic DHC behavior of a Zr-2.5Nb pressure tube is discussed based on the stress gradient ahead of the crack tip governed by strain-hardening rate after yielding and a change in texture accompanied by DHC, and the distribution of the {1017} hydride habit planes.

No abstract

No abstract