Air pollutants from residential solid fuel combustion are attracting growing public concern. Field measured emission factors (EFs) of various air pollutants for solid fuels are close to the reality and urgently needed for better emission estimations. In this study, emission factors of particulate matter (PM), organic carbon (OC), elemental carbon (EC), and various polycyclic aromatic hydrocarbons (PAHs) from residential combustions of coal briquette, coal cake, and wood were measured in rural Heshun County, China. The measured EFs of PM, OC, and EC were 8.1–8.5, 2.2–3.6, 0.91–1.6 g/kg for the wood burnt in a simple metal stove, 0.54–0.64, 0.13–0.14, 0.040–0.0041 g/kg for the briquette burned in an improved stove with a chimney, and 3.2–8.5, 0.38–0.58, 0.022–0.052 g/kg for the homemade coal cake combusted in a brick stove with a flue, respectively. EFs of 28 parent PAHs, 4 oxygenated PAHs and 9 nitro-PAHs were 182–297, 7.8–10, 0.14–0.55 mg/kg for the wood, 14–16, 1.7–2.6, 0.64–0.83 mg/kg for the briquette, and 168–223, 4.7–9.5, 0.16–2.4 mg/kg for the coal cake, respectively. Emissions from the wood and coal cake combustions were much higher than those for the coal briquette, especially true for high molecular weight PAHs. Most EFs measured in the field were higher than those measured in stove combustions under laboratory conditions.

[1] Five new instruments for semicontinuous measurements of fine particle (PM2.5) nitrate and sulfate were deployed in the Atlanta Supersite Experiment during an intensive study in August 1999. The instruments measured bulk aerosol chemical composition at rates ranging from every 5 min to once per hour. The techniques included a filter sampling system with automated water extraction and online ion chromatographic (IC) analysis, two systems that directly collected particles into water for IC analysis, and two techniques that converted aerosol nitrate or sulfate either catalytically or by flash vaporization to gaseous products that were measured with gas analyzers. During the one-month study, 15-min integrated nitrate concentrations were low, ranging from about 0.1 to 3.5 mg m À3 with a mean value of 0.5 mg m À3 . Ten-minute integrated sulfate concentrations varied between 0.3 and 40 mg m À3 with a mean of 14 mg m À3 . By the end of the one-month study most instruments were in close agreement, with r-squared values between instrument pairs typically ranging from 0.7 to 0.94. Based on comparison between individual semicontinuous devices and 24-hour integrated filter measurements, most instruments were within 20-30% for nitrate ($0.1-0.2 mg m À3 ) and 10-15% for sulfate (1-2 mg m À3 ). Within 95% confidence intervals, linear regression fits suggest that no biases existed between the semicontinuous techniques and the 24-hour integrated filter measurements of nitrate and sulfate;, however, for nitrate, the semicontinuous intercomparisons showed significantly less variability than intercomparisons amongst the 24-hour integrated filters.

No abstract

No abstract

No abstract