Nitrogen (N)-doped graphitic layers were deposited as shells on pregrown silicon nanowires by chemical vapor deposition. Graphite-like and pyridine-like structures were selectively chosen for 3 and 10% N doping, respectively. Increasing the thickness of the undoped graphitic layers from 20 to 50 nm led to an increase in the charge capacity of the lithium ion battery from 800 to 1040 mA h/g after 45 cycles. Graphitelike 3% N-doping in the 50 nm-thick shell increases the charge capacity by 21% (i.e., to 1260 mA h/g), while pyridine-like 10% N-doping in the 20 nm-thick shell increases it by 36% (i.e., to 1090 mA h/g). This suggests that both pyridine-and graphitelike structures can be effective for lithium intercalation. First principles calculations of the graphene sheets show that the large storage capacity of both N-doping structures comes from the formation of dangling bonds around the pyridine-like local motives upon lithium intercalation.

Vertically aligned ZnO--CdSSe core-shell nanocable arrays were synthesized with a controlled composition and shell thickness (10-50 nm) by the chemical vapor deposition on the pregrown ZnO nanowire arrays. They consisted of a composition-tuned single-crystalline wurtzite structure CdS1-xSex (x=0, 0.5, and 1) shell whose [0001] direction was aligned along the [0001] wire axis of the wurtzite ZnO core. The analysis of structural and optical properties shows the formation of Zn containing alloy in the interface region between the ZnO core and shell, which can facilitate the growth of single-crystalline shell layers by reducing both the lattice mismatch and the number of defect sites. In contrast, the TiO2 (rutile) nanowire array can form the polycrystalline shell under the same condition. The photoelectrochemical cell using the ZnO--CdS photoelectrode exhibits a higher photocurrent and hydrogen generation rate than that using the TiO2-CdS one. We suggest that the formation of the CdZnSSe intermediate layers contributes to the higher photoelectrochemical cell performance of the ZnO--CdSSe nanocables.

Various germanium-based nanostructures have recently demonstrated outstanding lithium ion storage ability and are being considered as the most promising candidates to substitute current carbonaceous anodes of lithium ion batteries. However, there is limited understanding of their structure and phase evolution during discharge/charge cycles. Furthermore, the theoretical model of lithium insertion still remains a challenging issue. Herein, we performed comparative studies on the cycle-dependent lithiation/delithiation processes of germanium (Ge), germanium sulfide (GeS), and germanium oxide (GeO2) nanocrystals (NCs). We synthesized the NCs using a convenient gas phase laser photolysis reaction and attained an excellent reversible capacity: 1100-1220 mAh/g after 100 cycles. Remarkably, metastable tetragonal (ST12) phase Ge NCs were constantly produced upon lithiation and became the dominant phase after a few cycles, completely replacing the original phase. The crystalline ST12 phase persisted through 100 cycles. First-principles calculations on polymorphic lithium-intercalated structures proposed that the ST12 phase Ge12Lix structures at x ≥ 4 become more thermodynamically stable than the cubic phase Ge8Lix structures with the same stoichiometry. The production and persistence of the ST12 phase can be attributed to a stronger binding interaction of the lithium atoms compared to the cubic phase, which enhanced the cycling performance.

Few layered GeAs nanosheets exhibit a band gap of 2.1 eV, corresponding to that of monolayer predicted from first-principles calculations.

Germanium-tin (Ge(1-x)Sn(x)) alloy nanocrystals were synthesized using a gas-phase laser photolysis reaction of tetramethyl germanium and tetramethyl tin. A composition tuning was achieved using the partial pressure of precursors in a closed reactor. For x < 0.1, cubic phase alloy nanocrystals were exclusively produced without separation of the tetragonal phase Sn metal. In the range of x = 0.1-0.4, unique Ge(1-x)Sn(x)-Sn alloy-metal hetero-junction nanocrystals were synthesized, where the Sn metal domain becomes dominant with x. Thin graphitic carbon layers usually sheathed the nanocrystals. We investigated the composition-dependent electrochemical properties of these nanocrystals as anode materials of lithium ion batteries. Incorporation of Sn (x = 0.05) significantly increased the capacities (1010 mA h g(-1) after 50 cycles) and rate capabilities, which promises excellent electrode materials for the development of high-performance lithium batteries.