ABSTRACT:A novel polymer-dispersed liquid crystal composite film was prepared using liquid crystal and dual resins, namely, UV-curable urethane diacrylate and thermo-curable epoxy, with a fixed LC content of 50 wt%. A combination treatment of UV irradiation and heat was performed in sequential steps. At first, the urethane diacrylate resin was cross-linked through UV irradiation and a pre-UV-cured film was formed. Then, the pre-UV-cured film was heat treated for curing the thermo-curable epoxy resin. As the thermal polymerization continued, LC droplets were formed and became embedded
POLYMER-DISPERSED LIQUID CRYSTAL COMPOSITE FILMSwithin the polymer matrix. PDLC films obtained from the polymer matrix with refractive indices in a range from 1.511 to 1.523 (1.517 ± 0.006) have optimal electro-optical properties. Films with a refractive index higher than 1.523 have high contrast ratio (CR), threshold voltage (V th ), and V 90 , whereas those with a low refractive index of 1.508 have low CR, V th , and V 90 . In this study, we found that PDLC composite films with optimal compositions prepared by dual resins (UV/thermal) have good electro-optical properties.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.