No abstract

The results of investigations on combustion of Karazhanbas and Tengiz oil on the surface of water are presented. The minimum thickness of oil layer allowing to initiate and support the process of combustion is stated to be lie in the range of 3–5 mm. For ignition and maintenance of stable combustion of oil on water surface, a synthetic sorbent is proposed. It is found that, the synthetic sorbent accelerates the combustion process of oil on water surface threefold in comparison with the combustion process of oil without a sorbent. It is shown that the remaining mass of oil on water surface after combustion process termination, presents a bituminous substance having a good coalescence and high adhesion that allows to collect it with high efficiency by a mechanical method. The process of ignition and combustion of oil on the water surface is significantly affected by contained in it combustible volatiles. In this paper, on the example of oil from Tengiz field, the regularities of the influence of temperature and salinity on evaporation of light fractions and the burnout process are revealed. It is determined that the degree of water salinity does not affect the process of evaporation of light fractions of oil, this process is significantly affected by temperature water. The research has shown that the important factors that influence the degree of burning of the oil layer on the surface of water is the degree of salinity and the initial temperature of water, while these relationships are complex. Revealed that the salt water burning process more profitable to produce oil at water temperatures above 20 °C. The developed model in has been supplemented with a coefficient of thermal conductivity as a function depending on temperature. Numerical results more accurately predict the experimental observations. The reason is that thermal diffusivity is determined more precisely.

No abstract

The aim of the study was to develop methods to reduce the penetration ability of the flame front and red-hot striking elements that propagate in the confined space of mines. In the article is considered a method for localizing explosions of a methane-dust mixture in coal mines, by creating an aqueous barrier (increased density) in the propagation path of the flame front and incandescent particles, using a high-energy pyrotechnic composition based on nanoaluminum. The optimal pyrotechnic composition contents of ammonium nitrate - 50%, smokeless powder - 45%, magnesium - 3% and nanoaluminum - 2%. This composition punched the target to a depth of 6.5 mm with a barrier thickness of 50 mm. Water cannon with a nozzle with a diameter of 80mm, allows to localize the spread of the flame front.

The purpose of this study is the development and investigation of gas-generating composition based on potassium chlorate for the destruction of a stone. The thermodynamic analysis of the energy characteristics of the studied gasgenerating compositions was carried out. Influence of various amounts of nano-aluminium on features and regularities of burning and ignition of pyrotechnic gas-generating composition on the basis of potassium chlorate was studied. By results of thermodynamic calculation and experimental work the optimum gas-generating composition for destruction of a stone -KClO3-72 %, polyethylene -17%, nano -aluminium Alex-11% was chosen. The carried-out polygon tests on the destruction of a stone had shown high efficiency of use of this gas-generating composition for destruction of a stone.