No abstract

With the advantages of high conductivity and low cost, porous carbons have been considered as the most attractive materials as hosts of sulfur cathode in lithium-sulfur batteries (LSBs). However, LSBs always suffer short cycle life due to the “shuttle effect” of lithium polysulfide species (polysulfides), which are intermediate products during the charge/discharge processes. The weak interaction between carbon and polysulfides results in the dissolution of polysulfides from the cathodes, loss of active material and eventually fast capacity fading. To overcome these drawbacks, we employed a biomass-derived carbon as the host material in sulfur cathodes. Results from X-ray diffraction (XRD), scanning electron microscopy (SEM) and nitrogen sorption reveals that this biomass-derived product is amorphous carbon and is composed of both large (>10 nm) and small (<5 nm) pores. Using as hosts of cathodes in LSBs, the biomass-derived carbons could deliver a high reversible capacity of > 800 mAh/g and retain >80% of initial capacity after 200 cycles. Especially, the activated carbons exhibited 80% capacity retention after 400 cycles. The promising LSB performance could be ascribed to the unique porous architecture of biomass-derived carbons. The meso/micropores in biomass-derived carbons could provide more sites to anchor sulfur and polysulfides, while macropores provide channels for fast transport of ions. This was corroborated by the results from the electrochemical impedance spectroscopy (EIS), the thermogravimetric analysis (TGA) and absorption measurements.

No abstract