No abstract

No abstract

Significance A multichannel mixed‐conducting hollow fiber (MMCHF) membrane, 0.5 wt % Nb2O5‐doped SrCo0.8 Fe0.2O3‐δ (SCFNb), has been successfully prepared by phase inversion and sintering technique. The crystalline structure, morphology, sintering behavior, breaking load, and oxygen permeability of the MMCHF membrane were studied systematically. The MMCHF membrane with porous‐dense asymmetrical microstructure was obtained with the outer diameter of 2.46 mm and inner tetra‐bore diameter of 0.80 mm. The breaking load of the MMCHF membrane was 3–6 times that of conventional single‐channel mixed‐conducting hollow fiber membrane. The MMCHF membrane showed a high oxygen flux which was about two times that of symmetric capillary membrane at similar conditions as well as a good long‐term stability under low oxygen partial pressure atmosphere. This work proposed a new configuration for the mixed‐conducting membranes, combining advantages of multichannel tubular membrane technology and conventional hollow fibers. © 2014 American Institute of Chemical Engineers AIChE J, 60: 1969–1976, 2014

Highly-effective sustainable hydrogen production from ethanol and water was achieved in a tubular dense mixed-conducting oxygen permeable membrane reactor, in which water splitting took place at the tube side of the membrane and oxidative steam reforming of ethanol occurred at the shell side simultaneously.

SignificanceThe multiple types of efficient oxygen transport paths were demonstrated in high‐mechanical‐strength hepta‐bore Ba0.5Sr0.5Co0.8Fe0.2O3‐δ hollow fiber membranes. These types of paths play a prominent role in enhancing oxygen permeation fluxes (17.6 mL min−1 cm−2 at 1223 K) which greatly transcend the performance of state‐of‐the‐art Ba0.5Sr0.5Co0.8Fe0.2O3‐δ hollow fiber membranes, showing a good commercialization prospect. © 2017 American Institute of Chemical Engineers AIChE J, 63: 4273–4277, 2017