In this paper, the changes of oxidation temperature of sulfide corrosion and the deficiency of distributed optical fiber application were analyzed. The test platform of oxidation temperature of sulfide corrosion was established, and the performance test of optical fiber and the simulation of oxidation temperature of sulfide corrosion were realized. The hardware part of the control system used STM32 as the controller, the software part was based on the process characteristics of the controlled object, using MATLAB to carry out the simulation of PID, fuzzy, fuzzy PD plus I, fuzzy PID algorithms, and their performance are evaluated using both single indexes and comprehensive indexes. The experimental results also showed that the proposed fuzzy PID can achieve better control performance with less overshoot and shorter setting time. Therefore, the fuzzy PID was chosen as the temperature control algorithm to build the optical fiber sensor test platform, and an alarm method for testing the oxidation temperature of large area sulfide corrosion based on the optical fiber performance was obtained. Then, considering the influence of spatial resolution on optical fiber sensor, this paper used piecewise PID to simulate the temperature rise process of three stages of sulfurization corrosion and oxidation. The results showed that the alarm method of oxidation temperature of sulfurization corrosion has limitations for small-scale oxidation of sulfurization corrosion, and it needed to be combined with machine learning to identify temperature anomaly.

No abstract

No abstract

In order to equip more high-energy pulse loads and improve power supply reliability, the vessel integrated power system (IPS) shows an increasing demand for high-voltage and large-capacity energy storage systems. Based on this background, this paper focuses on a super capacitor energy storage system based on a cascaded DC-DC converter composed of modular multilevel converter (MMC) and dual active bridges (DAB). The cascaded converter is called MMC-DAB for short. This paper analyzes the topology and modulation strategy of the system in detail. Taking into account the shortcomings of the traditional bidirectional power control strategy, this paper proposes a control strategy where the DAB module of each branch independently controls the voltage of the sub-module capacitor. The mathematical models of the traditional and the proposed control strategy are established. The stability of the two control strategies is analyzed and compared. Finally, a MW-level engineering prototype of the MMC-DAB energy storage system is designed and manufactured, and the effectiveness of the proposed control strategy was verified through experiments.INDEX TERMS Vessel integrated power system, super capacitor energy storage system, bidirectional power control; sub-module capacitor voltage control.

No abstract