Structural control has been comprehensively studied over the world as a multidisciplinary research field. The present work is motivated by an attempt to give a common frame to the recent research and applications of structural control technology in civil engineering across Europe. They include novel passive dampers, functional materials and semi-active dampers, active control systems, and their performance investigations. Design methods for the vibrations reduction of buildings, bridges, and wind turbines are discussed with reference to case studies. Control algorithms and dimension reduction techniques are also studied. Adaptation strategies and techniques based on the potential offered by piezoelectricity are reviewed

The behaviour of reinforced concrete frames with masonry wall infills is influenced a lot by the stiffness and strength difference between the frame and the infill, causing early detrimental damage to the infill or to the critical concrete columns. The paper reports the results from shake table seismic tests on a full-scale reinforced concrete (RC) frame building with modified hollow clay block (orthoblock brick) infill walls, within INMASPOL SERA Horizon 2020 project. The building received innovative resilient protection using Polyurethane Flexible Joints (PUFJs) made of polyurethane resin (PU), applied at the frame-infill interface in different schemes. Further, PUs were used for bonding of glass fibre grids to the weak masonry substrate to form Fibre Reinforced Polyurethanes (FRPUs) as an emergency repair intervention. The test results showed enhancement in the in-plane and out-of-plane infill performance under seismic excitations. The results confirmed remarkable delay of significant infill damages at very high RC frame inter-story drifts as a consequence of the use of PUFJs. Further, the PUFJ protection enabled the resilient repair of the infill even after very high inter-story drift of the structure up to 3.7%. The applied glass FRPU system efficiently protected the damaged infills against collapse under out-of-plane excitation while they restored large part of their in-plane stiffness.

No abstract

A shaking table testing of a 16.6 t five storey steel frame structure with and tuned mass damper (TMD) named as Tuned Mass Control System (TMCS) installed at the top has been carried out in the Dynamic Testing Laboratory at the Institute of Earthquake Engineering and Engineering Seismology (IZIIS) in Skopje, Republic of Macedonia. For estimation of the effectiveness of Tuned Mass Control System (TMCS) large number of shaking table experiments have been performed. Simulating different earthquake time histories on the model structure with and without TMCS it has been demonstrated that this system is capable to reduce the responses in order from 10% to more than 50% depending on the frequency content of the seismic input and the corresponding sensitivity of the structure. Given a high quality analytical model of a structure and a dynamic absorber, a series of variant analyses have been performed within the study to investigate the effect of the individual parameters and evaluate the efficiency of the dynamic absorber. The analyses have been performed to define the effect of the location of the absorber, also, upon the dynamic behaviour of the structure in the case the absorber is installed at the different level (storey) of the structure. Comparative analysis of the structure with TMCS having optimally tuned its mechanical properties versus structure that has TMCS having the same mechanical properties as tested specimen showed that the TMCS additionally improves the structural behaviour, depending on frequency content of earthquake excitation.

No abstract