Over the past decade, researchers in Japan, Russia, and the United States have been investigating the application of intense-pulsed-ion-beam (IPIB) technology (which has roots in inertial confinement fusion programs) to the surface treatment and coating of materials. The short range (0.1–10 μm) and high-energy density (1–50 J/cm2) of these short-pulsed (t ≥ 1 μs) beams (with ion currents I = 5–50 kA, and energies E = 100–1,000 keV) make them ideal flash-heat sources to rapidly vaporize or melt the near-surface layer of targets similar to the more familiar pulsed laser deposition (PLD) or laser surface treatment. The vaporized material can form coatings on substrates, and surface melting followed by rapid cooling (109 K/s) can form amorphous layers, dissolve precipitates, and form nonequilibrium microstructures.An advantage of this approach over laser processing is that these beams deliver 0.1–10 KJ per pulse to targets at expected overall electrical efficiencies (i.e., the ratio of extracted ion-beam energy to the total energy consumed in generating the beam) of 15–40% (compared to < 1% for the excimer lasers often used for similar applications). Consequently IPIB hardware can be compact and require relatively low capital investment. This opens the promise of environmentally conscious, low-cost, high-throughput manufacturing. Further, efficient beam transport to the target and excellent coupling of incident ion energy to targets are achieved, as opposed to lasers that may have limited coupling to reflective materials or produce reflecting plasmas at high incident fluence. The ion range is adjustable through selection of the ion species and kinetic energy, and the beam energy density can be tailored through control of the beam footprint at the target to melt (1–10 J/cm2) or to vaporize (10–50 J/cm2) the target surface. Beam pulse durations are short (≥ 1 μs) to minimize thermal conduction. Some disadvantages of IPIB processing over laser processing include the need to form and propagate the beams in vacuum, and the need for shielding of x-rays produced by relatively low-level electron current present in IPIB accelerators. Also these beams cannot be as tightly focused onto targets as lasers, making them unsuitable for applications requiring treatment on small spatial scales.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.