7-Octenyltrimethoxysilane, a model coupling molecule to study the adhesion promotion of a silicone elastomer on an Al 2024 alloy

A highly transparent and photothermal composite coating for effective anti-/de-icing of glass surfaces

“…The adhesion test of the coating is carried out by method B – orthogonal notch tape test in ASTM D3359. 34–40 After spraying the coating evenly on the surface of the glass substrate, the sample was placed on a horizontal platform. The coating surface was cut with a cutting tool at a cutting speed of (15–25) mm s −1 to make 6 strips in the axial and longitudinal directions of the glass substrate, respectively.…”

Evolution of the corrosion process of AA 2024-T3 in an alkaline NaCl solution with sodium dodecylbenzenesulfonate and lanthanum chloride inhibitors

“…Fig. 9a and b is the fitted Al2p and O1s spectra for the sample immersed in the solution without inhibitor for 0.5 h. On the Al2p spectra three Al peaks are seen at 71.8 eV, 74.1 eV and 75.2 eV, which may be assigned to metallic aluminum [31], Al 2 O 3 [32] and Al(OH) 3 [32] respectively. On the O1s spectra also three Table 4 EIS fitting parameters as a function of immersion time in 0.58 g L −1 NaCl solution (pH 10) with different inhibitors.…”

Investigation of Effect of Additives on Adhesive Properties of Silicone Rubbers Sealant

“…It has multifunctional groups with a general chemical formula of R-SiX 3 , where X stands for hydrolysable groups bonded to Si atoms, and R is a resin-compatible group. It is commonly used to significantly increase the bond strength and durability by providing the chemical bridge to connect the inorganic material (especially silicon-containing materials) and resin [2][3][4]. By using the right silane coupling agent, a poorly adhering paint, ink, coating, adhesive or sealant can be converted to a material that often will maintain adhesion even if subjected to severe environmental conditions.…”