A compact triband antenna using artificial magnetic conductor for wireless body area network communicationsFront

Abstract

The proliferation of the Internet of Things devices and advancements in wireless communication have fostered the growth of Wireless Body Area Networks (WBAN). This research provides a triband antenna supported by a 4 × 4 Artificial Magnetic Conductor (AMC) array surface that has a low Specific Absorption Rate (SAR), a high Front to Back Ratio (FBR), and increased gain for use in wearable devices. For WBAN communications, the proposed antenna operates in the Industrial, Scientific, and Medical (2.4 GHz) band, the C (3.7–4.2 GHz), and the Wi-Fi 6E (5.925–7.125 GHz) bands. The dual-band AMC unit cell exhibits Double-Negative and angular stability behaviour at 2.45 GHz and 6.5 GHz. AMC-backed antenna achieved multiband functionality by incorporating slots into the unit cell and a defective ground structure into the antenna. The antenna was positioned 0.139λ 0 above the AMC surface, which measured 0.556λ 0 × 0.556λ 0 × 0.013λ 0 (at 2.45 GHz). The antenna exhibited good gain and return loss variations when mounted on curved surfaces. The proposed integrated design yielded substantial enhancements, as evidenced by the increase of 8.2 dBi in maximum gain, 25.2 dB in FBR, and over 93% in total efficiency. The AMC-backed antenna’s − 10 dB impedance bandwidth is 18.4%, 21.2%, and 22.3%, with corresponding frequency ranges of 2.25–2.66 GHz, 3.66–4.53 GHz, and 5.9–7.35 GHz. Additionally, the AMC surface showed an average reduction in SAR of 93.22%. Vector Network Analyzer and Anechoic chamber measurements proved simulation accuracy. As a result, it is strongly recommended that the integrated antenna design be acknowledged in WBAN communications.