A Comparative Study of Signal Processing Methods for Contactless Geodetic Monitoring

Abstract

Building structures are subject to various deformations caused by external and internal factors. Deformations are determined by various methods in the form of monitoring. It is very important to monitor the dynamic vibration response on bridge structures since these measurements allow us to identify any possible damage over time and take appropriate action. Our experiment, described in this article, is based on the use of non-contact methods, among which we used a geodetic instrument RTS (Robotic Total Station) and a seismograph to measure vibrations. The purpose and novelty of our work are reflected in the use of geodetic instruments to determine the dynamic response and synchronization of the obtained results. When using RTS technology, we increased data acquisition from 9 to 26 measurements per second. Comparative analysis of the measured signals was performed using FFT (Fast Fourier Transformation) and LSP (Lomb–Scargle Periodogram), based on LSSA (Least-Squares Spectral Analysis). The results showed us that when using the RTS geodetic instrument, it is possible to achieve frequency spectra comparable to those measured with a seismograph instrument. By increasing the number of measurements, the RTS method can be used to obtain more continuous data, which are essential for dynamic analyses.