A Facile Method in Fabricating Flexible Conductive Composites with Large‐Size Segregated Structures for Electromagnetic Interference Shielding

Abstract

To resist the plastic deformation of polymer particles during hot press molding, high molecular weights, and moduli are required for composites with segregated structures, thus the prepared composites exhibit poor flexibility. Also, larger particle sizes can bring lower percolation thresholds while the ensuing greater deformation destroys the conductive network. Moreover, segregated composites still face preparation complexities. Herein, a facile method for developing flexible composites with large‐size segregated structures is proposed. First, silver‐coated polydopamine‐modified reduced graphene oxide (Ag@PrGO), as conductive fillers, is prepared by electroless plating. Next, polydimethylsiloxane (PDMS)‐coated polyolefin elastomer (POE) beads are put into a bag containing the fillers. After a simple shaking, the fillers are adhered to the POE surface as the cohesive property of cured PDMS. Finally, flexible composites with large‐size segregated structures are obtained via hot pressing. Benefiting from the 2D structure of the Ag@PrGO and the ability to slip, the conductive networks possess adaptable deformability. The prepared composites exhibit excellent electrical conductivity (203.55 S cm−1) at filler volume fractions of 3.4 vol%. The EMI shielding effectiveness can reach 70 dB in the X‐band at a thickness of 1.9 mm and remains stable after bending and rubbing damage. This work paves the way for constructing large‐size segregated structures.