A Novel 19-Level Boost Type Switched-capacitor Inverter with Two DC Sources and Reduced Semiconductor Devices

Abstract

In this paper, a novel voltage-boosting switched-capacitor multilevel inverter (SCMLI) capable of producing 19 voltage levels using a combination of only 10 switches, 4 diodes, 2 capacitors, and 2 DC sources has been proposed. The main features of the proposed topology are 1) utilization of a very low number of devices, 2) very low Total Standing Voltage (TSV) equal to 6.55 and 3) self-balance property of the capacitors' voltages. In order to provide the IGBTs of the circuit with the desired switching signals, the Nearest Level Control (NLC) method has been adopted. To clarify the benefits of the designed topology as to the total quantity of switches, DC sources, capacitors as well as the total standing voltage (TSV), and converter boosting, a thorough comparison has been carried out versus the recently published 19-level topologies. Also, for the purpose of performance evaluation and validation, the suggested topology has been tested against various loads through an experimental setup in the laboratory using TMS320F28379D DSP as the processor. The comparative, simulation, and experimental results all imply the superiority of the proposed topology against its predecessor counterparts.

Second Order Sliding Mode Control of Three Phase Neutral Point Clamped Inverter in Stationary Frame

“…The prevalent topologies found in multilevel inverters are the Neutral-Point-Clamped (NPC) (13,14) Flying-Capacitor (FC) (15,16), and Cascaded H-Bridge (CHB) (17,18). Due to the smaller size requirements of DC sources, NPC structures are an exciting option for interfacing DGs with grids (19).…”