A Post-Treatment Method to Enhance the Property of Aerosol Jet Printed Electric Circuit on 3D Printed Substrate

Abstract

Aerosol jet printing of electronic devices is increasingly attracting interest in recent years. However, low capability and high resistance are still limitations of the printed electronic devices. In this paper, we introduce a novel post-treatment method to achieve a high-performance electric circuit. The electric circuit was printed with aerosol jet printing method on an ULTEM substrate. The ULTEM substrate was fabricated by the Fused Deposition Modelling method. After post-treatment, the electrical resistance of the printed electric circuit was changed from 236 mΩ to 47 mΩ and the electric property was enhanced. It was found that the reduction of electric resistance was caused by surface property changes. Different surface analysis methods including scanning electron microscopy (SEM) and x-ray photoelectron spectroscopy (XPS) were used to understand the effectiveness of the proposed method. The results showed that the microsurface structure remained the same original structure before and after treatment. It was found that the surface carbon concentration was significantly increased after treatment. Detailed analysis showed that the C-C bond increased obviously after treatment. The change of electrical resistance was found to be limited to the material’s surface. After polishing, the circuit resistance was changed back to its original value. As the electric circuit is the basic element of electric devices, the proposed method enables the fabrication of high performance devices such as capacitors, strain gauge, and other sensors, which has potential applications in many areas such as industrial, aerospace, and military usage.

Printed Electronics in Radiofrequency Energy Harvesters and Wireless Power Transfer Rectennas for IoT Applications

“…[135] This technique is free from this limitation due to using a concentrated aerosol jet to print patterns, whose parameters remain stable between the end of the printing nozzle and 10mm toward the substrate. [235,[242][243][244][245] The aerosol jet printing technique is currently broadly investigated-process optimization, [246][247][248][249][250][251][252][253][254][255] characterization of new inks and substrate materials, [256][257][258][259] and process enhancement. [260][261][262][263] As it is a maskless and noncontact technique, it is often considered a potential competitor to inkjet printing.…”

Progress of 3D Bioprinting in Organ Manufacturing

“…In aerosol jet printing, the “bioinks” can be printed on various substrates, such as metals, semiconductors, and polymers [ 43 ], and the products can be widely used in the field of electronics [ 44 ]. However, studies have shown that ultrasonic treatment can denature DNA [ 44 ], which has limited its application in the field of biomedicine.…”