A Review on 5S and Total Productive Maintenance and Impact of Their Implementation in Industrial Organizations

Kareem, Jamal Ahmed Hama; Talib, Noraini Abu

doi:10.1166/asl.2015.6084

Cited by 14 publications

(14 citation statements)

References 0 publications

Supporting

Mentioning

Contrasting

Unclassified

Order By: Relevance

“…As seen in Figure , adding a high amount of hydrophobic silica to the PMPS copolymer results in a partial increase in the dielectric constant ε′ of the composites. Adding 100 parts of silica and 150 parts of silica increased the ε′ of the PMPS composites from 3.11 to 3.70 and 4.18 (30°C, 10 Hz), respectively 27 . At room temperature, the ε′ values of the composites remained unchanged with an increase in frequency.…”

Section: Resultsmentioning

confidence: 93%

“…Adding 100 parts of silica and 150 parts of silica increased the ε 0 of the PMPS composites from 3.11 to 3.70 and 4.18 (30 C, 10 Hz), respectively. 27 At room temperature, the ε 0 values of the composites remained unchanged with an increase in frequency. As seen from Figure 4b, the dielectric loss ε 00 (below 10 2 Hz) of the composites was significantly lower than that of the PMPS copolymer; this was mainly because the filler suppresses the generation of DC conductance in the composite material.…”

Section: Dielectric Properties Of Pmps Compositesmentioning

confidence: 92%

See 1 more Smart Citation

Dielectric properties and dielectric relaxation process of polymethylphenylsiloxane/silicon dioxide nanocomposites

Zhao

Huang

et al. 2022

J of Applied Polymer Sci

View full text Add to dashboard Cite

In recent years, polysiloxane dielectric elastomers (DEs) have attracted extensive attention, but their low dielectric constant and electrical breakdown strength are the main factors that limit their wide application. In this work, we report the effects that a high content of hydrophobic silica has on the dielectric properties and dielectric relaxation behavior of polymethylphenylsiloxane (PMPS). Introducing a high content of hydrophobic silica into PMPS composites increased the dielectric constant of PMPS composites from 3.11 to 3.70 and the breakdown strength of PMPS composites from 35.31 to 42.66 kv/mm. The high content of

show abstract

Section: Resultsmentioning

confidence: 93%

Section: Dielectric Properties Of Pmps Compositesmentioning

confidence: 92%

Dielectric properties and dielectric relaxation process of polymethylphenylsiloxane/silicon dioxide nanocomposites

Zhao

Huang

et al. 2022

J of Applied Polymer Sci

View full text Add to dashboard Cite

show abstract

“…As the spectrum of schemes, adopted principles/pillars and TPM applications vary from one study to another, some authors have devoted stand-alone papers to review the literature related to TPM (e.g. Jain et al , 2014; Kareem and Talib, 2015). Ahuja and Khamba (2008) provided a thorough listing of publications on TPM and classified them according to various attributes, e.g.…”

Section: Literature Reviewmentioning

confidence: 99%

A sequential TPM-based scheme for improving production effectiveness presented with a case study

Bataineh

Al-Hawari

Alshraideh

et al. 2019

JQME

View full text Add to dashboard Cite

Purpose The purpose of this paper is to improve production effectiveness of equipment by facilitating the implementation of the key principles of total productive maintenance (TPM). Design/methodology/approach A sequential TPM-based scheme consisting of 13 procedural steps is proposed. The steps cover the basic aspects of a generic improvement system, i.e. planning, implementation, checking, corrective action and control. Findings The proposed scheme was effective in increasing the overall equipment effectiveness by 62.6 percent over a nine-month period only. This was a direct reflection of improvements in equipment availability, efficiency and product quality. A positive feedback regarding the smooth implementation of the scheme was also received from the responsible maintenance staff. Research limitations/implications The proposed scheme is intended mainly to the manufacturing industrial sector, which utilizes failure-prone equipment in running operations. Originality/value This study presents an original scheme that tries to avoid the many barriers of success frequently encountered during the implementation of TPM schemes, as reported in the literature. This scheme is unique in integrating between 5S and safety, health and environment initiatives, by capitalizing on the close relation between the two initiatives, and simplifying procedures for measuring how well the two initiatives are implemented in an organization in one score card. Different from previous studies, the scheme treats both “education and training” and 6S as a foundation to the core TPM principles.

show abstract

“…Among the available anticorrosive techniques, epoxy coating systems are the most common type of protective coating. They not only possess outstanding processability but also exhibit excellent adhesiveness and weather resistance 7–10 . In addition, the coating process is environmentally friendly and chemically stable with low volatility 11,12 .…”

Section: Introductionmentioning

confidence: 99%

Anticorrosion performance of polyaniline/clay nanocomposites in epoxy coatings

Kang

Wang

Chen

2022

J of Applied Polymer Sci

View full text Add to dashboard Cite

Thickness-tunable triple-layer polyaniline (PANI)/clay nanocomposites were synthesized via in situ intercalative polymerization of PANI within the clay layers. The PANI/clay nanocomposites were characterized by Fourier transform infrared spectroscopy, X-ray diffraction, scanning electron microscopy, and thermogravimetric analysis. In this study, the thickness of the PANI/clay nanocomposites was easily controlled by adjusting the proportions of PANI and pristine clay. Based on oxygen transmission rate measurements, the oxygen barrier properties of pristine clay can be enhanced by the growth of PANI. Notably, the oxygen barrier property of epoxy loaded PANI/clay nanocomposites was linearly dependent on the PANI growth thickness. After 30 days immersion electrochemical impedance spectroscopy test under saline conditions, the resistance (R c ) of the pure epoxy coating (2.47 Â 10 6 Ω) increased to 5.76 Â 10 10 Ω when 1 wt.% PANI was added to the epoxy coating. However, when 1 wt.% PANI/clay was added into the epoxy coating, the R c of the composite coating increased further to 7.66 Â 10 11 Ω. Notably, the ratio of PANI to PANI/clay was only 36.5 wt.%, indicating synergistic anticorrosion properties can be obtained by the intercalation of PANI/clay additives. Therefore, PANI/clay nanocomposites have a high potential as anticorrosion additives for industrial epoxy resin coatings.

show abstract

A Review on 5S and Total Productive Maintenance and Impact of Their Implementation in Industrial Organizations

Cited by 14 publications

References 0 publications

Dielectric properties and dielectric relaxation process of polymethylphenylsiloxane/silicon dioxide nanocomposites

Dielectric properties and dielectric relaxation process of polymethylphenylsiloxane/silicon dioxide nanocomposites

A sequential TPM-based scheme for improving production effectiveness presented with a case study

Anticorrosion performance of polyaniline/clay nanocomposites in epoxy coatings

Contact Info

Product

Resources

About