A tailored heating element for resistance welding of complex shaped joining surfaces

Abstract

To obtain a larger freedom of design for structural components, a single wire heating element which is capable of welding large and complex shaped surfaces has been developed. The processing window for welds of endless-carbon-fiber-reinforced polyamide 6 (CF-PA6) using the developed heating element is investigated, varying the main process parameters electrical power, electrical energy and joining pressure. The influence of these process parameters on the quality of the welded joints is judged by single and double lap shear tests and by the analysis of micrographs. As a result, recommendations for the processing parameters are derived. The climate conditions of the specimens are varied to analyze the impact of moisture on the shear-transmitting joints whereby an accelerated method for conditioning of PA6 specimens is used. Furthermore, a sensor-free method for monitoring the temperature of the welding process is presented and compared with a classical measuring method.

Resistance welding of carbon fibre reinforced PEKK by means of CNT webs

“…Different types of resistance welding heating elements have been investigated. 22,29–33 These mainly consist of metallic meshes 19,21,22,24,26,28,34 or carbon fibre (CF) material systems (either CF fabrics or CF “Organo Sheets”-CFRTP film preforms). 4,25…”

“…Different types of resistance welding heating elements have been investigated. 22,[29][30][31][32][33] These mainly consist of metallic meshes 19,21,22,24,26,28,34 or carbon fibre (CF) material systems (either CF fabrics or CF "Organo Sheets"-CFRTP film preforms). 4,25 Metallic meshes are relatively heavy, can be affected by or promote corrosion, and can increase the radar crosssection.…”