A well-balanced strength and electrical conductivity in rolled composite prepared by in-situ TiB2p/Cu composite powder

An intrinsic electrical conductivity study of perovskite powders MAPbX3 (X = I, Br, Cl) to investigate its effect on their photovoltaic performance

“…Considering that 100% IACS is defined as the conductivity corresponding to a volume resistivity of 17.241 nO m at 20 1C, these values are around 86 times lower than that obtained for the TiB 2p /Cu composite powder prepared by the in situ reaction in combination with rolling, which were measured using a Sigma 2008B eddy current conductivity instrument. 52 Focused Ion Beam (FIB) was employed to ascertain the crosssectional profile of the thin films, which is consistent with the literature, measuring approximately 250 nm. All three samples have almost the same thickness because we are using the same parameters for deposition through the spin coating technique.…”

“…Considering that 100% IACS is defined as the conductivity corresponding to a volume resistivity of 17.241 nΩ m at 20 °C, these values are around 86 times lower than that obtained for the TiB 2p /Cu composite powder prepared by the in situ reaction in combination with rolling, which were measured using a Sigma 2008B eddy current conductivity instrument. 52…”