Alloy Design for Additive Manufacturing: Early-Stage Oxidation of Nickel-Based Superalloys

Abstract

This body of work aims to inform alloy design for additive manufacturing by investigating the early-stage oxidation behavior of Ni-based superalloys processed by laser-powder bed fusion. The oxidation of 14 Ni-based superalloys—some novel and some heritage—at 1000 °C for 24 hours is studied through thermo-gravimetric analysis. The mass gain, oxide layer thickness, oxide scale composition, and $$\gamma ^\prime $$ γ ′ depletion zone size are measured. The influence of the alloy composition on these variables is assessed in order to elucidate how increasingly processable and oxidation resistant alloys can be developed. The alloy compositions with Al content greater than 9 at. pct form continuous Al2O3 scales at 1000 °C and display markedly lower parabolic rate constants, mass gain, oxide layer thickness, and $$\gamma ^\prime $$ γ ′ depletion zone size. The alloys of lesser Al content have reduced oxidation resistance and formed oxide scales of predominantly Cr2O3. Alloys with Ti content of 2.7 at. pct and greater formed Ti-rich oxide phases in their oxide scales as well as TiN subscale. A trade-off between alloy processability and oxidation resistance is identified, dictated by the deleterious effect of Al content on the ductility dip and the benefit of Al for oxidation resistance. A property space along the pareto front is highlighted which is ideal for having oxidation resistance and processability.

The Effect of Dopants on Structure Formation and Properties of Cast SHS Alloys Based on Nickel Monoaluminide

“…Various plasticizers are added to alloys for increasing fracture toughness [3][4][5][6][7][8][9][10]. An essential requirement on hot gas path materials is the oxidation resistance of the surface at high temperatures and under thermocyclic loading [11][12][13][14][15][16][17][18][19].…”